yast2-installation-4.4.59-150400.3.18.1 < > , ȉ dp9|luhhYn}dFhtBΌf t&#m^b.L0QUTu)=R aBև1Bob *? Z- J,GKWc>ulSXÑsn ٬P/RmĆ}FmVKVcw շGqV'w(7cՆEIzZұ(8#y('*wA&&!DYx KMI9}xXܪ > R x ? h d * E # ) 0 t
b 6 6 6
t 6 L 6 d 6
e 6 j 6 p 6 v w 6 { }h ) ~ ) 2 )
n
( 8 9 : = r > r ? r @ r B r F r G r 6 H w 6 I | 6 X } Y } Z ~ [ ~ \ ~$ 6 ] 6 ^ ~ ) b 8 c d n e s f v l x u 6 v d w X 6 x 0 6 y & z " d C yast2-installation 4.4.59 150400.3.18.1 YaST2 - Installation Parts System installation code as present on installation media. dsheep64
hSUSE Linux Enterprise 15 SUSE LLC GPL-2.0-only https://www.suse.com/ System/YaST https://github.com/yast/yast-installation linux noarch
if [ -x /usr/bin/systemctl ]; then
test -n "$FIRST_ARG" || FIRST_ARG="$1"
[ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || :
for service in YaST2-Second-Stage.service YaST2-Firstboot.service ; do
sysv_service=${service%.*}
if [ ! -e /usr/lib/systemd/system/$service ] &&
[ ! -e /etc/init.d/$sysv_service ]; then
mkdir -p /run/systemd/rpm/needs-preset
touch /run/systemd/rpm/needs-preset/$service
elif [ -e /etc/init.d/$sysv_service ] &&
[ ! -e /var/lib/systemd/migrated/$sysv_service ]; then
/usr/sbin/systemd-sysv-convert --save $sysv_service || :
mkdir -p /run/systemd/rpm/needs-sysv-convert
touch /run/systemd/rpm/needs-sysv-convert/$service
fi
done
fi
PNAME=security
SUBPNAME=-checksig
SYSC_TEMPLATE=/usr/share/fillup-templates/sysconfig.$PNAME$SUBPNAME
# If template not in new /usr/share/fillup-templates, fallback to old TEMPLATE_DIR
if [ ! -f $SYSC_TEMPLATE ] ; then
TEMPLATE_DIR=/var/adm/fillup-templates
SYSC_TEMPLATE=$TEMPLATE_DIR/sysconfig.$PNAME$SUBPNAME
fi
SD_NAME=""
if [ -x /bin/fillup ] ; then
if [ -f $SYSC_TEMPLATE ] ; then
echo "Updating /etc/sysconfig/$SD_NAME$PNAME ..."
mkdir -p /etc/sysconfig/$SD_NAME
touch /etc/sysconfig/$SD_NAME$PNAME
/bin/fillup -q /etc/sysconfig/$SD_NAME$PNAME $SYSC_TEMPLATE
fi
else
echo "ERROR: fillup not found. This should not happen. Please compare"
echo "/etc/sysconfig/$PNAME and $TEMPLATE_DIR/sysconfig.$PNAME and"
echo "update by hand."
fi
if [ -x /usr/bin/systemctl ]; then
test -n "$FIRST_ARG" || FIRST_ARG="$1"
[ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || :
if [ "$YAST_IS_RUNNING" != "instsys" ]; then
/usr/bin/systemctl daemon-reload || :
fi
for service in YaST2-Second-Stage.service YaST2-Firstboot.service ; do
sysv_service=${service%.*}
if [ -e /run/systemd/rpm/needs-preset/$service ]; then
/usr/bin/systemctl preset $service || :
rm "/run/systemd/rpm/needs-preset/$service" || :
elif [ -e /run/systemd/rpm/needs-sysv-convert/$service ]; then
/usr/sbin/systemd-sysv-convert --apply $sysv_service || :
rm "/run/systemd/rpm/needs-sysv-convert/$service" || :
touch /var/lib/systemd/migrated/$sysv_service || :
fi
done
fi
# bsc#924278 Always enable these services by default, they are already listed
# in systemd-presets-branding package, but that works for new installations
# only, it does not work for upgrades from SLE 11 where scripts had different
# name and were not handled by systemd.
# When we upgrade/update from systemd-based system, scripts are always enabled
# by the service_add_post macro.
systemctl enable YaST2-Second-Stage.service
systemctl enable YaST2-Firstboot.service
test -n "$FIRST_ARG" || FIRST_ARG="$1"
if [ "$FIRST_ARG" -eq 0 -a -x /usr/bin/systemctl ]; then
# Package removal, not upgrade
/usr/bin/systemctl --no-reload disable YaST2-Second-Stage.service YaST2-Firstboot.service || :
(
test "$YAST_IS_RUNNING" = instsys && exit 0
test -f /etc/sysconfig/services -a \
-z "$DISABLE_STOP_ON_REMOVAL" && . /etc/sysconfig/services
test "$DISABLE_STOP_ON_REMOVAL" = yes -o \
"$DISABLE_STOP_ON_REMOVAL" = 1 && exit 0
/usr/bin/systemctl stop YaST2-Second-Stage.service YaST2-Firstboot.service
) || :
fi
if [ $1 -eq 0 ]; then
# Package removal
for service in YaST2-Second-Stage.service YaST2-Firstboot.service ; do
sysv_service="${service%.*}"
rm -f "/var/lib/systemd/migrated/$sysv_service" || :
done
fi
if [ -x /usr/bin/systemctl ]; then
/usr/bin/systemctl daemon-reload || :
fi V ~
S H t < ` N
z \ ^ q Q L Q Y L j ^ ^ e \ W ^ V b Y Z G i W O K [ U W c l M o X ` T X ] p X ^ d e 8 \ Q V M \ Z N l O S Q U M q V X ] E ] a \ M X U Z I V T O k I R !G R ,+ ) U X * ; & B @ 0
8 m G % G %y
3
; K p % ] { g
! 0 5
+ p G ?
q q
n \ l $ e P} p v !w i < R
* + B E h % ~
] 6 g H
f % n Y n | y G ? F S P A큤AAA큤AA큤A큤A큤A큤A큤A큤A큤A큤큤A큤AA큤AA큤A큤큤A큤A큤A큤A큤A큤A큤AAA큤A큤A큤AA큤A큤A큤AAA dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd/_dddddd9a5da028cef75216e19a4d37bfdf8fc90266763ee88a68445ef9e81b6d3eda25 789be1d410af5321d77f9eed6a46ec976b0bddb2858dc6670ebe6cc5d0167b9d 508cb76a2997a27b6f9a7b9e1fcfbfc76c07c33eade07028eac527ac8866ec34 1337c5bb20edbedf15654da0ae506267b3adc897ada125375c143c1aae892f76 0379800c76b30b8b34255227edd0c7e24a7be5ff017622caaf9460933b96f2d5 d2807a673fcab8987c835dbc49bd6bd76b8206997bda13ab5427c30cf61edde5 b9c226d13b7995646c0b733937997acb00e7b61dc582fc02b49aeff5b4bcefaf 592dd707b4ff0e0f8a3d0cfc979d3ba1e05942afa5e84e07064454d8882ca2fb 6acd5da54297da7f1a33643ea3656b31991dd61785452fb06ff4c9601cfccec3 58fb0d7de90165efe380b23ce9d4366e568ea2ffa7dab184980fd2ca6dfd8dae 295c5929793c9e66ebf2284d0f8b029e88707fbfa89264a3069c6b36505bcaac 22b9fadf1dddd40bc3511fd5b56223a03588c1a9743e669ce94f20610b550ea0 e8d5707ae5f01cce18e2bf1cd407fc57ef8be1ca6964d25c030eec099330f568 e64f74a536fa4f8ec6f1bed633181b944b7eb862d639d895e88dfdd85b369ebe ed30a18aa1d18eab00d179fdab30b881dda241478221174462424f817a15bcc7 eba2c944c6b1ce469f9901e25331cbe707c05081bdd817090f14c720eaaf448b c4fc7739c49c951c116ce3b889074cbe95206acd8b731efe113ee8f480bb30a5 e043ed30c611dcba3096fb5c0962457d4eca83c5ef4dc9f59007a4109f60645f d43580b6a333e08bdf46b835e5ac16e6eef3b1e79b5c221905ea26b76d0e72a9 a1d1c5f5106e78900fadea8efab9ab1332cb6d3f39fc1ffcb96eb30aef70912b 55446cbe6c8d515a26515bfc49834a870de2b07cbe7d1307ad282edec7e7ea13 64a9a9883df974d1562dfb8723f76caedde7dd85be11fc02d571fe452d185b17 0551e37f82c677c07967b99b15abddb9c71a4a63d001201266c46194f0d29ec2 1e8643a4e7a82d6d9d3366c2f4f1070ad2c9d5f6ff7d7398767490b07c644ee3 9579328794ad475f352bb9e1767f102d600c612fd72764f455ad5cde2229f8d7 0119933c456f4f48430105642ba5411291e3a28d64645978fea8cb4e0e4c8eac dcb068b628daab7034278b6107a38dafcac750f70a25d1a5f1c30c075a33a37f 24228912794541bde322cb37879bcdcf962295aef520f0af4f78be2bd9a06423 2e945255238fa9975349cb4c7a8f7805c1f766767cefd70a32a68bcbbe2d5fb6 7f7236a19bcfc43f4e5e0a1034f6a0a7d9ca365d1298f548d3db8cf017dcb8af 66f469dcba872064f902a8d6f001981c6fbe4ef01eadfa6cba4ccd42be20f72e 88e9adaf640d0be54f11a1a2ce71ed5061bee1de0b63e703ee212e69d703c5a2 3a383b32a093bc204ad5dfdd7bbee53a2af9c6c2790712ab684e2e19213b1797 2e30ee17a0e07a99efb6963b9cf0930f7979d543e2ef66dda2fddd4c9c35c48b f0c0160fc63fe2d6822282748b299d9c4559a21be2b2e3e9f0575131897b533d 6109d84daad0f76e7a42f1257d6845ffa6bec2d9db54b6d0f3da496d6709ef63 ebb5d5c1aefc5936a4851ce3ef3ee618f3153c6d8eea911b0b40106a7ca530d9 14d64c674299ed12a14ddc35fcc2b011280b668f9dc04e4432f94b4805b4d431 c67b0f55ad50a273c71ef9e6920ccb1e23a52cfae62026d97862df816b6460ca d0ea7587cd9536e183c835710385a77b9c06769ddf35fccde18bbd12b988b9d2 5da067b60cbb2aae9b11a92e4741d13ca9ae2c2a8633dc00768bba60a7aa3466 9e4ff26639dc74d9d9c3010a8a843be7000f79385416042059adf7e97b9bd973 9874a121f2a0abd3cb8b6e5482529ad42ba520427d15828d6d902da744d03bed 91c4d5f8ca66fc5b94b1bb6f0ef1d9083c6dca80d90e77ae1f5b7a4cb8004a8e faa04b05c9acb1495e0c7a5ea4f36ade7a45bb8f7f2139ce6f62e1e05d351a74 ae98b85a8fc40d9e3a057bd790be509710423dd62d0ecb44059d69860dbdb05e b4a585dc630c5bd66e9ae0e2fecc4b3177a0d0f7aa665867b94c95a9c938c64a cd5975b765ff1b582640f6884d8dc2a1a907cb79698c88358b342881bef10ddd c0b85e4a08563817bb785205bb30c72d1be57862a6caeb0a808000c60d2b782f 54213cdddb07070fa3d05b2c6d0005ce5a97f1425e6869d4b4ab192a288e7c86 0bd95a6287c019f0b881ff3f812b1f2eeda32f240bcc6b232864470f8fe09f5d c24a126d23255e1dc02d46680fe42e0d7f3a32e5fb351abed41bef9bb23e9d3b ce8c383c15757e474995bd62cc741820f12be65ed4e16bfb9ced25f6bc33bd17 5488c275915146a461d1cf1a5e4625d2f9244fba50320ef6d5f96b4e24a76724 727e91d5f995055926180a89c4b0105a5d6660a982a82ff5473299a04de83802 b3ad101534e02100ff56b05eebfc5131d15406bbd615f4e7c747b115e9bd4e56 d22fd569f4cb69c0455da277fd1a3e92da6ee4db3dcf7c8c6056f45645cbe896 2babaab343e3df1c08733edd598377a1fbeb34a8617f1e4755eaf444411e90fe 259f3286bfbce801dc0b82fa7303a51a3b5a2eb7203d89f64bb10b2fd092a915 dabf895095672800e69fc0228eeb368426c9be962157725d0d0e49b3925a1ef7 907ef14e48956392ccc250554f63a9b247bb5a7e887e9f5581c3de900be8d549 7173707d2ddcd6ec79ae5cf39debedad5afbb1984bb7a1ee9617ef740b46736a 6a6ddceb775a9f710524ba4a3e4504fc6556ead9aa92d9c97afabbc94e2ec161 a83a5d2f613b597af7a2b1edc776adf18dde3c58acec43cac88da58381ee4df2 c221c18b60e37fa97cd88aa1c48c2aa80ffd4fc1ad1e943664c5a178719fad97 625efb88ef52f4de9841ee93cced97e26a4aa5df7e2f7a33d83f12bb1b9c7497 cd6af96e1ad915614c413ddf1addc79fc33138177476b9cde905abd4881ff629 aa94337dd6d23cae90bf719c2dce0a7c0c8a791bf9fc67fae52900c86328ff1c ab8863f8bf0b610fee8293eb572ea14e289ea3b9a350d92c6c5bf451e34a0ede 71dce635f50b617614a0da59d93988046f3f3aba607d90b882c96a178bb7fc38 bd7effd87e01fd215d057f860ca7de6e0dedeb90689c7c9d6a882486fbacf19c f7906f3de2693d7ba0be6ed12966ab783edee531abf4e89ca927ae035a9a5812 391a93c09ff343121e5841aa6c6896f7b1a756520bac115a65f0eb02911bc73f ae3bb295b35a353e675519d5f4f3d4f08c0400378a44e40095207c3ef25430ec 835d4bc91bc29f24e1b7111f355c6bc302b8ee62dbd125744818cdb85e6b6466 19c7c379d3c72d865346a64c5291d6015a6daa9401f98c132cc3f58c7348e77f 007e338252d3392e5dd8d8699bfc40f63cb885e37afdb25297d76a5ebc6f7d21 7991d13bdc33aeac1c21b5a539d452f16ac484a8ff5693369a7179d25830679d d93b1786733310435c9fa12ff085b89ccbdd0979b07100b2b844f5359770f675 b38d75fe8fccf7f0bb34bea8cec0f48eeae1d87e784cb2d498741fbb0b84c74e c4b2de9e29f919bf5a3bfcc1c5ff3396666525785c356d45da7d6d600a244ca4 0f37da462b416ea16b3987deb2fe89f8e2170c53e367e6316c254801deb8b98e c482abc1d70320a2f094ee33c6068641f74270c1c2ba7c27ddd3306822e0edcb 4a5446b2c929df4544fb222739c7e19274848d5ce17280ad38b33002237098e5 c832174ef0c2df33fe0e32ba43cf21897f7e2e881ff2aa13a0634d43ef5f1012 99c89c55f1b02aba7afdcf16d956e9f4fd17cda670c8d4c99ad47af97c7d5d66 f03643ae10409782ee56985f8d36d34719f62d4362a0a14bebdc360a9609f25c 5071df15a3a3ae55f43bc532397745aad25d1bbf3be5b0437f2f202bcd4baf87 bd815ee87d28611faf2790e912efa508c7216e882d6f9347f3763f24fb543d1f 575d2825760b2ba49bc130b30d2e9131331598c1759d5c2bdce961c9dab0b11a 17f5a93aadc392ebb38a4230a44607db34b8d605d421b3e222ebfe82c633fe78 1ca506c41b6e0e2153f17f8e8b1f6fe959cfd8b28feedda7f9f974f9848f3e66 74a8de589161bafa7ea6cd992a3e0465f616e9bb22282565c985fa35e2e3c2f9 a599bb60a35915ebc348be66da722370bba7e947b2a262e82f046cfd761416aa 192887728c0bb34b659e7c29253929d87c950cbf70656e4a45e47d39e18b8acb 8ef4c6715d8cb637d802a8a51d4df97253ac1a7115eb409d25502bbce3e7ea26 ffeea3ea97ea5901c94ca5f77a22f83da1c9dd47bff5d97df4e6fcbc2a298cbd 18c186757c7749df218cea0a1c011e106debd1250e426fd61df1221e6a2c8e86 74dce9197c5445d9f219a34a5875ca98cd0a936f8d0c8addfe7f00d65a02a676 3fc81665411e230324f9833c783d1899e72cabad9d93bf4a392580c0260116f3 438ee8096a9c55925371ddac077c53cb28ea4d0584cdbcf605237180b0dca87a f5451fb77097064fd4b9430be22a2b22955286df75db38f680ed5f36d017f04e bf8a545d85d6bd7e6dad08590542433f7d3a8c1f66b055e53e9f4ceed0b95150 e1a3b0bf5151d356bdd2e88b8ba948b08108e5a5661851922c63cd3379d94314 d51c377b1c027b0b66406120c9bc033c9919de02af6207fc6217e55e2eda8804 153a0431290af16e8a8d536a247fc681cec8fc7ff0faec1d06934e44053ac9ae ea8ec8c342d442ac683343288ab87dc1c73b38ccdb84a5f4db887f01d4ca23a2 4a99db6a3c8c797a316d70dd4091a63152a2859c03821c3ed9ed8a83f6b6a23f 8e49a2d568f1a2681fb84e5c064929c21f15b731de72119940ee80a05b326422 03a5873e365fe9ec3f1b16b71ae945d585f22c4868f70c0777c88b8250836386 0ae9b79599d469cba2a6a27fae5b26629ba02e3a24a801187a04b814343fbf10 02d3308f0c5810aa29956927903cf3a020d747c8d5d39bb0355f55c77646a4aa 9e07ee10b3a7d1837d21563a5b48fec035a2b6be502adce9b21036b5b174743b c09cce3724678ccb9ced565f24d686f424fed5dd88fcf43f317736bf478f50da 45c5934697846417f92e35af5d8fce5bacf5e74a5536b227abe3bc01029cbcfe 991ee50ca43d703cc83ef2948d20ab4a18a5b7a463b64f784819f345ff462de3 0fc715d5143857845af9f846569490f14a23ef33576d2719165b1d4e44d83af7 d66279a12e4eb3cd4e1a4874601caf3ce90a36ff205bf391657127262ea2affa 97242e5e84aa5c1f34c0e05d498b9d5522de71450db80690d2be70fc3305ebf3 871ef6260df73c4a3ce8502254ab649723defd4913ffa889a197a616c18df754 109e090366bf14cad2904126347d10994a6ccf05a5e96771602811caf6b39346 02303ddffa3de4dea54d76dc55c49dad5a2cc3b320ca0da43ad3810e0af26c58 e324884af7807e6135966228841a1ff99599fdce0ce00564cd3ddcaa13a83c9a 8aab3ed90882d422a22602f59d9fe92ce114d75551cf60421110b875c757cb83 4377614b6109e6543a0092904777acca98a95e3dc9f2301985daa5b8a919a142 f3705e42c3049df5d2954c5408990a927adb7aac788c94dc354423ed68caa059 dcf17bfb3e948c861bb7b26908025f857958bf37dc115590441569819e973108 183f889f516c0ebfacdb9638d419436fac617439f08e3aabe8156c424b7782d1 e26c5bd90a84760f2e5e6783e50b3855582d6fc9140c6c35f0c49715ff2bc394 0bb79f6a5d0dbba64f2dcf5669ac091df2bc01e0d9208903154993ba8862c54a cf37c047c3f92e7f311ab785f2fe504dce1df12a70eb10cdd2928035bcff5c28 12670a31ed88168a7b4be49abfead515fc15fd5b74e846906fa1e36f874a952d 15c69a40485e0ef59e7cc2af55ea42e2a5793fa75198b22c1235f6b77cb2d265 dca5cd725b84dd0e5708e6a032e5fa7c485cccfe01714109c340399a4ba3ed76 4bec43cfacd359484f43720adf34edf9bbda18f89f352df2503b580c435bc6c0 107524e02835d577e4b75a1f14400f6950916975695521e6cd8f5da717400d22 47053f472a28341f4a18a18728c07a900a6dead0e9776865c041444444009ebd 03c0076bbcf2a35a0bf1ffe1716a216835289ca82540485151360a22d69281ce ac2965565c7535ce5c3e2c2a51c327d4d0f7f2c0f1167f7dd7dd2bd4c3efd1b8 1432b2eda66ce1964ba73d29cd3d021af8393f0d8d0284d55adb7a6a33d599d0 e167a73393d87bd34ed844ec65c824532cd958065b08b98682680d1f66365440 25ca1fe244df0a25027dc8a3a1eefc0a45e37ddfd82cd13a6a0c0f620f1aa59e 75e919e3f0dec92c95ab2ecf4135208d07b08f39baf517383e4fd0be039076c3 fc6cafb6b1644179bf15ae73de7c17da2a4257feba74f5f8a485d9e11f0ef4ca b03dfa1ad581fb4fc44def2149f9618297ee1ed97c9a2113b181f8ff10288d70 6b802d93c3fd8d54fa941052fd06f1f5d66dd1dc2ec66b4561ce62c3a83bbfd4 e306ce49b433df35be8f96d138b00749567feeb5f1382d8fd197e0387e7656a7 17abc40af5e96c5b2be46ab1f5fa4a373408e27d0c5b030c5d0944d63f8a9a7e f1104fa9db62937aa8c3d565125a29d9fd941f5a6135ffc1d2946f798ec18c0c f27f3bf36d4b31a4442a96e2021169adf48847be3a0eb1cc7902791c05d8e10b bf9c0b68f4a842c611282d7c58efab52648a22c4c40b9b0f1c80b94ffc14db61 fe34e96a8fa7c6dc191b14110ad828a64c96f50db7742fcb890c29e82ab36bc1 3e7084c82502e100884218e8092288a9debb6d7f83a2e183f699e2badcd4d905 39e0e0a1e98c1e7ea74b0c01e5948a09b745b41dfd5463d16839db876bf2ed12 3d3db73ff75d625efbf6d8116503d85a47c033270a6aba1b5346fe593f624f42 25ebde9cfeb28ed44805161a8b65f11af81c4579ee632a54a578fae2bc53024b 70f5e6d51b19c73586aee6636f70d65ca3b589e0380d601a44db8a8a6e13bbc1 5a27b57613a08d04b6e96a3f0d077d3f854a763744a74069f5c14b470b8dd9de 9a33541cf6eaee84a0fed379ac46e2b8f9d8b769c3343f221ec605bdfa5e8037 ff0fdfe0ea33087e2a0cc8e7f4038ccc7ed2e1667ed8d811175288343f6d583d 7c149564cae84881157a7b61ea930a6d0a41f199353e0bc94be0b7e0cf64b2a4 cf3db571f0a4fdbdd6b92f3d7524a1d09a4a0066e75e0ef4ae49b9e2991fffbb c453f3177731a957b8f4fae5dff9d13e3594825a86a897fb6ce67dcb0079ef78 5dc82181cc9ffaf504d1db5cfaf674a83adbc65b553213d3ad334c80f991eb43 d7ae44914e003326e3aa8bc940d5c081492abeccc2d0ab0a358bd4cd4208702a 2de3cd134c6ee3f33f388234f8c0ceddc56a9906f780a5953a48a7565f295107 f0e2234eede5231d5ef17ce12bf3b5ec03e0adc3874d17ccedd523f593137a8f d26fd9436b0566d487bba539c14ce0ccdab377f7d250a83aad5845218c2bbea9 b1cc667cd5835faa48f77d473bac39d3afa2809e87a75187ba5c19f1280fad77 09df8df11d6577980883766aa2e952f54eb66eb7c638f402209fb3b498779398 8b7f1a34880eb2ab2325e8e945bd1bfe5c43f1ccd990983cb559f0a68e237664 689375e61e79d6a2b08ee42700d351d1dd9be62e0ac0a0f3fb13c6b22b4879fd 84a1d1f62dce9b894843ac1e522d959e6e1a7ec3073f16d17d723dc0be0c3a1d e1de9c18568d4c907a5eca1c103013366411dacefa335ed2d6d95e24c95ac053 cd6ebaaf40c0e1837bff59c137cbedd95ecc1485b52f8c5ba5b1b5726190ec89 acd0b7797f47c3d855b9af263256fed128e55dd4269018de9924e915d0b2a221 0e4ac16e7ba8cc5e3f11cc06f2dc7fae1fd73734d7f5f2f7503079a9953d09b8 aaefc398f6ac5d54a3d985abaf43cd2e368086e279dcdb85e85d6ed0dce33355 c8611bccc0b0e95c2ddb8a020236612f1760ec84083ad27624bfc3b6e8ca9617 493ae43288b4a0704976e069c7fdbdd70d7600f8a18ba4c460e8424f9ab90343 51c45eff70e1bbc1221837e81453c82c8c2309ca0f74f2a6948d90e57570f6a4 c019b6a7408aa695ddcb04fc18dffda764dfe73bae4728e5e7c11d5ad5566585 de8ae7f4def1d3440c7e69cadd8190a917af7cb0daf6cafed0798153007329df 4a55da813ab82ecc943ed73570121c59e95abca389441ae1332686e4509cd84f 594124bf1ae6b2417fda601b0beb01ee87a0496882ee6583b80867ed1ee71f17 3354cdf51b5ace9582261d7dceb0787fa90d7a818f4335e9a0f8aca10c09f75f 662aada4bf880265201152cfe73532b48e059a5a24a01f8f913c9904523eeded 76db2667c9dda152db411bf798d531c5abf6e9373f602c1796a03e27299f3f4b 900cebb3e035d62e21003ae20eb32f983a0b185ccbfc8456549e3043b3b81250 5e4e478a14a7b7108de1db3987188d074657e2a275b5fd099553368322c58117 b6a974119d65380c633a871da9e79070bee45bb68724d9ad0a6aab2783976496 91f0a988f515848d95ef31a7c7bd49bee583edb99a977f5ecac536ba8cc83951 b30095c769230a6c0ed43d3cb675382f3cd551af61b28fbc037c58c4365bb237 42ac481a77aede0db8f0f3d138d90c708c5da74f1e59876822703a701088f0ab 99c1d7b4361091c8725415be3df5ee413e55eb5e4280b785fd9de621a8ca0547 8b92099a12300470ad1faae4120b7a00ab139367666fe216a91fd43f475cc057 a6d0f05b092bd3654da38c9045c7f7b98e9587dd29e1b323b2575e7a43b254cc 41ec9959e123dc5b6a4f815c74255b7fcd6ed842a892886bca15bddb80568110 57c627553b90d06ed4b252faf70ca3ebea6f0d1787fa17dce10d6fa8d36caf2a 5f372f2cfbcb9e7afb71b63949c15d98073dd64dd5a2256c7fd601e89798a965 a75924d02228fb329c218bbbef00b56b5b620a7c7682dc251b97a315be732b55 1d3703b1f9f3b41b440b784d179b0e57307c6019a358654b78d2f6d87b19816b 768d6d55416e1bab57a99e34a6c9d2d96f3d97ff0b27b2eb7ac2d1d28f2f23d5 2eaaedcab1f00fcd6250a50cb1781e6fb9d05861278cb607d949c38189fcaa9c 091042be95f88c97e8a5acd21c1d5fcef866104a1a84c96b6b91494fc1ffa96a c973691b2fdc937ff7269b8c2afa4a029a3b42af6f9f20d9e05a5c38b8e460f5 0733679d49f0b339da862ff6e281e3d717d7872e37fd5b0aab60e04f8f3a8084 734e9ccdd0e476b26ff9d0befa5a1317796c0e52f86b0ea45a070e99e30f51fa 7126fc5027ec719dae269cc8b6052dfd83d47127507c4f536f0d144edef113ea 1d611e73fb53e432e06040d79c404d5fa067bf5719110f53cad4a02bb822e87e ea3b18eff72534b88e4f231d0577662e4adf1266d465e9e86a77bc2394de39d5 1ddc8c7823e1a13ac56d57e84728b8eb1018df8b62b12b76a8eeff249138e96c 2c778c374c139ebbd7ec6d1921aaba294583201e2c98a876994fe955160c64d9 c1e9013024889174b0a886baedab9d661bacbca49619b5c9ce6c636ec6e60ef8 b2e3d1ed90c1912829e754b41ae50939a6d0ef4c58008ee218d391231e85abff bd12449fde358c99cd4a45a2a459a82fd5b462fe56141d95b27806b4f0023020 e8d777305b01129e8ded04f9eb450b8482f1641550e90f7ffec8a1c7663d23f3 45d4165fe5115b385b1bc664c30a8949fd4f807f6eee16dfef3e92db1970a249 6587e1226eabbe2d579c8a76fae3434027b08a9df1f767857657aa126fb8be1c ea858c506462128ac3786979a1d2d9bd9c5e28b4355927fc19cccfa26bbad58e 2f2ed704ab746e477223cfcef27bb030266b2a57c41649981cb81288f3dddf74 8cf2c7d4415658296ef8e4279a4bb07c594f32c43c4b37759adbf878908c86e6 3cb6d6bf092ae7177bfb9e9ee30335c0b5fec2230d5c52f93d6257ed3a70d671 c992412593703604e76694189e237152ef17c48210fa495be0f0d1f6b66e7c32 aea9261f4152edd320c939db7dc59f6edb361f733dbd4849551eb2e350226c67 24a2fe84063c33cbc1f248ebd540fca7318f0530a9efc3195d0b3a1fefe4a4d4 0350451cd40f25fcb0ce1b5fba94e8cfaa4d5d8288334a4a43a7ac96bb594382 187fadf54e91c67963868aa516ffef7deb8d40c0ce1d0af6544ce9623c1bf5ec beed00a551d4e7c2e50da38882bf51eae09d86cfc06cdd295b24eb24b7533ec6 917f51a0c3001bae71d87c63ba2cfc182d1be6aa171bd1b3b4dcaaec7b0ee10c 79e351a41e412e2c592a444557ebb4f92ab7b56088d8adc780fea91e270ac167 6d2206cf93f04f5365dcf05caee22d10627b0dd078c4248ba7da3c2f488b2905 24c96080572bc05db5a636a475fca8e3dff548a086dd978669aa2f81e097872e 83b4e92d3052d0aaa90606c5863d3a6206543c1f125d49b58e8ea8ec4b79ee73 29cfc1169baafe1256e00c68c4f2c6b0d8c06954f3efdc72a48c4e6ed334d35f 62f55e4d2c11dcf98a04c4b70c535093052efd05d6d73450e3f7a80cd8e6d9b3 8c9177c5b70db69e81c6c24a16a5bd0b39343a0962a3e0c9119d5add3dbdb8e5 7e9eab7f8d5573000536b48b66d44c12d811f4465c421b0bc49797d7cd19ca83 265c29f88c12f7a67d3c947d0730b88c51a629055fc0e8814f10c3b1878fc205 bef0e2291f2424859c7fdf3d4fef2716f0ddd32af6a934dd7dd1791a11a2b07d 8f6c00440a773caeff5285076709328b2d6bec1776ec9db5e70c0fe511f2094f f66f776362fd6aa82d72eea9c1ff2bb526c4fc8017fdc6767a8fb3f7b6370cc8 0e0cb89906a4de575214165f568645f48413c681eb2247bfcdef04d9d47e2896 3d7d2c87d1f75d43159194a12fb25c8867e0aa7fcbbe3f07d4842e786bccc628 796a7f32cee4f8917744c105c33d25b01a9d72ef254ad114877fae96feec50fd a5d45f33f5d55496164c852aed3ed1fd7ea2d7c5ef7570be8ee67b859c2b6049 5cce8e9a46078ceae1e3dff4273758dfa2dc62850a79cf4b6222a1e56596c5f8 bd9c38ad4226bb7eace255a5567748ac11ab31483db23d91d6bdf844dc1a3714 829e7db05011c084c2e1e9def37622ee6d0c0d7d347c432544f115fd2de7e927 9627fbc6b252007091cb00cd062f24ca31c6363329c56c0a7b227eaa9061b606 0ac1f4d57a97f20c6c2a7466c2d59be67273a93b4e7b6e693018ceb8150a6844 52c0630e5047c98d02512ffd818b86f9fa1f56e225d77a3d8b98248bf1851524 ec165e3ef272bd4e57d6cf01dc9cc283a56d1b3c442b81ac70287d3319e9b5ca af139636c80341513953f97ee3fec5adee742cbc539612c427b0ef9a9da1ea2e fc89e256f447fde79005de9cbf5425fd35c4cf1afc7dbb97898ff3117a4cf7f0 6aa9c159b7cef7690b5aa7c4338dd71ee6975121f91ca31f0ece5b1fd5ae6cc9 56924faefffc36d0b4bd772abc62b5be23a356710e67e87ccfe75873584c749d 666fe79681e0e3bd3b570aa158512f57014291161e402c2edf692021610efc4e f5a04ee29392fca3d318b0878eb428c200e265b575578b4a078cce565b148315 63fc867e6f31e0e6b9a4e35f84b4e7266ba5fb1277f043c5d7d80971cc77806e 9521b1494bac47b7e2bca558a9c412d89c3bfd7caf42b51c05a973f0158e404d f0138b926850a1589abf1c93d6576386a74f9c48885b5a274386584b5c29eafa 9bc5915d1c25fc36a8caeb8ef313e715cc7559c4968a94964f6171d392bb86fa 225a88081810fde4947be40af5a5714f203ea50a3730edcafc70a0f81f217a33 20d19ec37336a14f4c1c761cca68ed8121d186b113654b81f8d3f2e40b221c50 f6d9083f27eeb729ae879b775aad919f6a39039d9ae9a1a52617b69a4ca446a6 d1c048d9c1b41e51ed3a10cb11faf5b7762f23f53ba65d4337af804e5a554f6f 5f6392461f6e724751ec57b8c558380f7901ecf0988552f90bcff6903976e0e4 2cbb4c555f169efb4f477b93566b21231b7eefeaab774867125e276cbe7974c3 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 3dd65090fb7e1db85fba600bfec36401963985c491b5a623e11e1aed25217da2 495f2fbe583547222e8cca736383f1a62c26b421ab756e199d0d8cb31a926e89 d505765ccbda7f9abf54c78624c1449b3f39eb1269c1248e58ab19e4cde4b825 root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root yast2-installation-4.4.59-150400.3.18.1.src.rpm application() application(YaST2/org.opensuse.yast.Installation.desktop) application(YaST2/org.opensuse.yast.ReleaseNotes.desktop) application(YaST2/org.opensuse.yast.Upgrade.desktop) metainfo() metainfo(org.opensuse.yast.Installation.metainfo.xml) metainfo(org.opensuse.yast.ReleaseNotes.metainfo.xml) metainfo(org.opensuse.yast.Upgrade.metainfo.xml) yast2-installation @ @ @ @
(yast2-x11 >= 4.4.2 if libyui-qt) /bin/bash /bin/sh /bin/sh /bin/sh /bin/sh /bin/sh /usr/bin/env /usr/bin/ruby augeas-lenses coreutils coreutils diffutils fillup grep gzip initviocons iproute2 pciutils rpmlib(CompressedFileNames) rpmlib(FileDigests) rpmlib(PayloadFilesHavePrefix) rpmlib(PayloadIsXz) rpmlib(RichDependencies) systemd systemd systemd systemd tar yast2 yast2-bootloader yast2-country yast2-country-data yast2-network yast2-packager yast2-pkg-bindings yast2-proxy yast2-ruby-bindings yast2-services-manager yast2-storage-ng yast2-users 3.0.4-1 4.6.0-1 4.0-1 5.2-1 4.12.0-1 4.4.42 3.3.1 2.16.11 4.4.12 4.4.13 3.1.33 4.4.1 4.0.6 3.2.1 4.0.175 4.4.2 autoyast2 libyui yast2 yast2-bootloader yast2-core yast2-mouse yast2-pkg-bindings yast2-registration yast2-security yast2-ycp-ui-bindings 4.3.26 3.8.2 2.18.6 3.3.1 2.17.10 2.18.0 2.17.25 3.2.3 4.4.2 3.1.7 4.14.3 d@ch@ch@cRbbڑ@bbw@bf@bBb4t@b3"b'E@b!@b b @b@b~b-@b@bar@a a@a7aNaa+@aՈ@aɪa*@a*@aaaa@a@a)@aW@aaza`2aTU@a9@a$@aa@```[`
@``@`O@`@```y|@`y|@`y|@`v@`v@`v@`pA`m`a@`Q@`J@`H`H`@`>(`<@`7@`6?`.V`#_@_$___ _ _@_E@_Wr@_N7_C_2@_ _ _ _@_A@_^^^@@^^n@^n@^@^^>@^U@^^t@^r
@^p^ku^W@^O@^Nt^Nt^M#@^J@^1s^)^(9@^ ^ @]|@]|@]Γ@]A]]@]]n] @]?]V]@]x]fl]^]S]J@]H@]9]\@\g\O\\\\\B@\@\Y@\\@\~d\~d\y \eX@\T4\-@\\@\
`\ @[=@[H[@[_[k@[<@[[@[Ѱ@[
@[[#@[#@[#@[[Q@[@[s["@[@[~[}P@[z@[b@[b@[Y[Y[<[4[3|@[ d@[[[Z@Z @Z4@Z@ZZ@ZZZmZmZ @ZZZԐ@ZԐ@Z̧@Za@Za@ZlZ@ZZ@Z@Z@ZkZ@ZH@ZH@Z@Z|;ZyZtRZtRZqZp^@Zk@Ze@ZaZ`@ZV @Z:PZ7Z7Z1@Z/Z.s@Z*~Z%8Z Z YYY@Y+@Y@Y@YMYܶ@Y@YA@YA@YA@YY@YzYYY@@YKY@YYY@YYYYYYYYV@YaYYx@YTYTYP@YGY0Y.@Y.@Y,
@Y"Y]Y Y XX@X@XXXXX~@X,X@XƉXCX@XO@XO@XBX@X@XpXX6@X6@XX@X@XX~@X|X|Xn5@XQ4@XGX43@X.@X-X)@X%X%X2@X@XWw@Ww@W@VɦV`Vy;@VwVjV^@VV@VUV<@V@V
@UU6@UUXŬUUĝUU(U4@U@U@U3@U3@Ua@UmUg@U\w@U:0@U4@U/@U /@UUUF@T-@TTD@TԬT Tи@T T}T,@T,@TTT TT5TLTuTeTXTWn@TSyTR(@shundhammer@suse.com ancor@suse.com jlopez@suse.com kanderssen@suse.com lslezak@suse.cz kanderssen@suse.com kanderssen@suse.com kanderssen@suse.com kanderssen@suse.com mvidner@suse.com kanderssen@suse.com kanderssen@suse.com jlopez@suse.com jlopez@suse.com lslezak@suse.cz ancor@suse.com lslezak@suse.cz kanderssen@suse.com igonzalezsosa@suse.com kanderssen@suse.com alarrosa@suse.com lslezak@suse.cz lslezak@suse.cz lslezak@suse.cz kanderssen@suse.com lslezak@suse.cz jreidinger@suse.com kanderssen@suse.com kanderssen@suse.com kanderssen@suse.com lslezak@suse.cz igonzalezsosa@suse.com lslezak@suse.cz igonzalezsosa@suse.com igonzalezsosa@suse.com lslezak@suse.cz igonzalezsosa@suse.com dgonzalez@suse.com igonzalezsosa@suse.com mvidner@suse.com jlopez@suse.com igonzalezsosa@suse.com lslezak@suse.cz lslezak@suse.cz shundhammer@suse.com dmueller@suse.com jlopez@suse.com jlopez@suse.com dgonzalez@suse.com kanderssen@suse.com lslezak@suse.cz kanderssen@suse.com lslezak@suse.cz lslezak@suse.cz kanderssen@suse.com mvidner@suse.com kanderssen@suse.com dmueller@suse.com dmueller@suse.com dmueller@suse.com kanderssen@suse.com lnussel@suse.com dimstar@opensuse.org lslezak@suse.cz dgonzalez@suse.com lslezak@suse.cz lslezak@suse.cz lslezak@suse.cz kanderssen@suse.com igonzalezsosa@suse.com lslezak@suse.cz jreidinger@suse.com jreidinger@suse.com jreidinger@suse.com jreidinger@suse.com jreidinger@suse.com igonzalezsosa@suse.com lslezak@suse.cz schubi@suse.de jreidinger@suse.com snwint@suse.com kanderssen@suse.com lslezak@suse.cz igonzalezsosa@suse.com schubi@suse.de schubi@suse.de lslezak@suse.cz snwint@suse.com schubi@suse.de schubi@suse.de jreidinger@suse.com snwint@suse.com jlopez@suse.com schubi@suse.de jreidinger@suse.com mvidner@suse.com aschnell@suse.com mvidner@suse.com jreidinger@suse.com dgonzalez@suse.com jreidinger@suse.com lslezak@suse.cz jreidinger@suse.com snwint@suse.com dgonzalez@suse.com kanderssen@suse.com igonzalezsosa@suse.com lslezak@suse.cz jreidinger@suse.com jreidinger@suse.com shundhammer@suse.com lslezak@suse.cz igonzalezsosa@suse.com igonzalezsosa@suse.com snwint@suse.com shundhammer@suse.com lslezak@suse.cz snwint@suse.com schubi@suse.de aschnell@suse.com jreidinger@suse.com schubi@suse.de kanderssen@suse.com okurz@suse.com dgonzalez@suse.com dgonzalez@suse.com lslezak@suse.cz jreidinger@suse.com schubi@suse.de jreidinger@suse.com lslezak@suse.cz snwint@suse.com lslezak@suse.cz snwint@suse.com schubi@suse.de schubi@suse.de dgonzalez@suse.com mvidner@suse.com dgonzalez@suse.com dgonzalez@suse.com jlopez@suse.com hellcp@mailbox.org schubi@suse.de shundhammer@suse.com lslezak@suse.cz dgonzalez@suse.com dgonzalez@suse.com snwint@suse.com snwint@suse.com dgonzalez@suse.com jlopez@suse.com lslezak@suse.cz jreidinger@suse.com jlopez@suse.com mvidner@suse.com mvidner@suse.com lslezak@suse.cz schubi@suse.de jreidinger@suse.com jlopez@suse.com jreidinger@suse.com lslezak@suse.cz lslezak@suse.cz hellcp@mailbox.org shundhammer@suse.com igonzalezsosa@suse.com schubi@suse.de schubi@suse.de schubi@suse.de jreidinger@suse.com schubi@suse.de lslezak@suse.cz schubi@suse.de schubi@suse.de dgonzalez@suse.com dgonzalez@suse.com schubi@suse.de dgonzalez@suse.com lslezak@suse.cz aschnell@suse.com dgonzalez@suse.com dgonzalez@suse.com jreidinger@suse.com dgonzalez@suse.com hellcp@opensuse.org schubi@suse.de schubi@suse.de knut.anderssen@suse.com knut.anderssen@suse.com schubi@suse.de knut.anderssen@suse.com schubi@suse.de aschnell@suse.com knut.anderssen@suse.com lslezak@suse.cz jreidinger@suse.com jreidinger@suse.com igonzalezsosa@suse.com jlopez@suse.com igonzalezsosa@suse.com aschnell@suse.com lslezak@suse.cz shundhammer@suse.com igonzalezsosa@suse.com lslezak@suse.cz jreidinger@suse.com igonzalezsosa@suse.com mvidner@suse.com lslezak@suse.cz igonzalezsosa@suse.com mvidner@suse.com jreidinger@suse.com schubi@suse.de jlopez@suse.com mvidner@suse.com jlopez@suse.com mvidner@suse.com mvidner@suse.com knut.anderssen@suse.com igonzalezsosa@suse.com schubi@suse.de igonzalezsosa@suse.com shundhammer@suse.com jreidinger@suse.com ancor@suse.com jreidinger@suse.com knut.anderssen@suse.com schubi@suse.de jreidinger@suse.com igonzalezsosa@suse.com schubi@suse.de lslezak@suse.cz jreidinger@suse.com ancor@suse.com jsrain@suse.cz qzhao@suse.com igonzalezsosa@suse.com schubi@suse.de schubi@suse.de gsouza@suse.com jreidinger@suse.com lslezak@suse.cz knut.anderssen@suse.com gsouza@suse.com igonzalezsosa@suse.com igonzalezsosa@suse.com rbrown@suse.com knut.anderssen@suse.com locilka@suse.com igonzalezsosa@suse.com lslezak@suse.cz jsrain@suse.cz jreidinger@suse.com knut.anderssen@suse.com jreidinger@suse.com schubi@suse.de igonzalezsosa@suse.com jreidinger@suse.com igonzalezsosa@suse.com ancor@suse.com knut.anderssen@suse.com jreidinger@suse.com lslezak@suse.cz igonzalezsosa@suse.com ancor@suse.com igonzalezsosa@suse.com gsouza@suse.com gsouza@suse.com igonzalezsosa@suse.com igonzalezsosa@suse.com shundhammer@suse.de ancor@suse.com aschnell@suse.com schubi@suse.de ancor@suse.com ancor@suse.com ancor@suse.com jreidinger@suse.com lslezak@suse.com jreidinger@suse.com jreidinger@suse.com jreidinger@suse.com jreidinger@suse.com shundhammer@suse.de lslezak@suse.cz schubi@suse.de knut.anderssen@suse.com lslezak@suse.cz knut.anderssen@suse.com lslezak@suse.cz knut.anderssen@suse.com igonzalezsosa@suse.com gsouza@suse.com igonzalezsosa@suse.com jreidinger@suse.com schubi@suse.de mvidner@suse.com igonzalezsosa@suse.com lslezak@suse.cz ancor@suse.com mvidner@suse.com igonzalezsosa@suse.com igonzalezsosa@suse.com igonzalezsosa@suse.com jreidinger@suse.com mvidner@suse.cz mfilka@suse.com mfilka@suse.com jreidinger@suse.com igonzalezsosa@suse.com kanderssen@suse.com jsrain@suse.cz schubi@suse.de kanderssen@suse.com jreidinger@suse.com jreidinger@suse.com mvidner@suse.com igonzalezsosa@suse.com mfilka@suse.com igonzalezsosa@suse.com jreidinger@suse.com mfilka@suse.com schubi@suse.de jreidinger@suse.com igonzalezsosa@suse.com jreidinger@suse.com jreidinger@suse.com shundhammer@suse.de jreidinger@suse.com schubi@suse.de jreidinger@suse.com lslezak@suse.cz shundhammer@suse.de jreidinger@suse.com igonzalezsosa@suse.com igonzalezsosa@suse.com schubi@suse.de igonzalezsosa@suse.com schubi@suse.de jreidinger@suse.com jreidinger@suse.com lslezak@suse.cz lslezak@suse.cz cwh@suse.com jreidinger@suse.com jreidinger@suse.com kanderssen@suse.com locilka@suse.com igonzalezsosa@suse.com igonzalezsosa@suse.com locilka@suse.com ancor@suse.com igonzalezsosa@suse.com jreidinger@suse.com lslezak@suse.cz lslezak@suse.cz schubi@suse.de jreidinger@suse.com lslezak@suse.cz igonzalezsosa@suse.com snwint@suse.de igonzalezsosa@suse.com schubi@suse.de igonzalezsosa@suse.com igonzalezsosa@suse.com lslezak@suse.cz kanderssen@suse.com kanderssen@suse.com lslezak@suse.cz ancor@suse.com ancor@suse.com lslezak@suse.cz schubi@suse.de jsrain@suse.cz ancor@suse.com knut.anderssen@suse.com igonzalezsosa@suse.com lslezak@suse.cz mfilka@suse.com jreidinger@suse.com igonzalezsosa@suse.com cwh@suse.com knut.anderssen@suse.com mvidner@suse.com igonzalezsosa@suse.com mvidner@suse.com mfilka@suse.com ancor@suse.com mfilka@suse.com cwh@suse.com schubi@suse.de jsrain@suse.cz jsrain@suse.cz mvidner@suse.com jreidinger@suse.com lslezak@suse.cz ancor@suse.com ancor@suse.com ancor@suse.com jsrain@suse.cz locilka@suse.com igonzalezsosa@suse.com schubi@suse.de schubi@suse.de schubi@suse.de igonzalezsosa@suse.com jsrain@suse.cz jsrain@suse.cz mvidner@suse.com shundhammer@suse.de locilka@suse.com lslezak@suse.cz jreidinger@suse.com locilka@suse.com jreidinger@suse.com igonzalezsosa@suse.com lslezak@suse.cz ancor@suse.com schubi@suse.de locilka@suse.com jreidinger@suse.com jreidinger@suse.com jreidinger@suse.com jreidinger@suse.com aschnell@suse.de cwh@suse.com lslezak@suse.cz ancor@suse.com lslezak@suse.cz schubi@suse.de jsrain@suse.cz jsuchome@suse.cz jreidinger@suse.com jreidinger@suse.com jreidinger@suse.com jsrain@suse.cz jreidinger@suse.com lslezak@suse.cz aschnell@suse.de jreidinger@suse.com ancor@suse.com ancor@suse.com jreidinger@suse.com schubi@suse.de jreidinger@suse.com lslezak@suse.cz - Don't always enable sshd and open the ssh port (bsc#1211764)
- 4.4.59 - Fixed the help in the installation summary to include the texts
from the corresponding proposals (related to jsc#SLE-24764).
- 4.4.58 - Write config for ssg-apply script according to the enabled
security policy (part of jsc#SLE-24764). - Fix copy of entropy pool during installation (bsc#1204559).
- 4.4.57 - Do not use "xrdb" for setting the "Xft.dpi" value, use a specific
YaST tool from the yast2-x11 package (bsc#1201532)
(xrdb depends on the C pre-processor increasing the dependencies
about of 22MB)
- Install yast2-x11 only when GUI (libyui-qt) is installed,
avoid installing the dependent X libraries in minimal (text mode)
installation (bsc#1201966)
- 4.4.56 - AutoYaST SecondStage: Revert changes introduced in 4.3.46 running
the initscript service before systemd-user-sessions again once
systemd patched logind (bsc#1195059, bsc#1200780)
- 4.4.55 - Do not restart services when updating the package (bsc#1199480,
bsc#1200274)
- 4.4.54 - AutoYaST Second Stage: Added a missing dependency to the service
to prevent getty-autogeneration listen on 5901 port (bsc#1199746)
- 4.4.53 - Revert changes introduced in v4.3.50 as it produces some ordering
cycle issues (bsc#1198294)
- 4.4.52 - AutoYaST: move custom file creation past user creation so that
the element files/file/file_owner actually has an effect
(bsc#1196595)
- 4.4.51 - Do not stop xvnc.socket but run the YaST2-Second-Stage and
YaST2-Firsboot services before it in order to prevent early
vnc connections (bsc#1197265)
-4.4.50 - Run the YaST2-Second-Stage and YaST2-Firsboot services after
purge-kernels to prevent a zypper lock error message
(bsc#1196431).
- 4.4.49 - Prevent getty auto-generation because it makes xvnc to fail when
it is started in YaST second stage (bsc#1196614).
- 4.4.48 - Avoid terminal login prompt when running Second Stage service
(bsc#1196594 and related to bsc#1195059).
- 4.4.47 - Fixed crash when starting the expert console (bsc#1196724)
- 4.4.46 - Fixed the start of the VNC server during installation. Done by
Joan Torres López (bsc#1196201).
- 4.4.45 - Use the default UI theme in SSH installation, the
"installation_slim" theme does not exist anymore (bsc#1196287)
- memsample-archive-to-csv - handle "ps" errors in the data file
- 4.4.44 - Modified Second Stage service dependencies fixing a root login
systemd timeout when installing with ssh (bsc#1195059)
- 4.4.43 - Do not create a Btrfs snapshot at the end of the installation
or upgrade when the root filesystem is mounted as read-only
(jsc#SLE-22560).
- 4.4.42 - LSM: Adjusted installation summary labels (bsc#1196013).
- 4.4.41 - Set the Xft.dpi resource after running the X server,
before running yast to fix hidpi issues with Qt 5.15
(boo#1173451)
- 4.4.40 - Fixed crash in Ruby 3.1 after pressing the hamburger menu icon
in the welcome screen (bsc#1195422)
- 4.4.39 - Redirect the STDERR output in the memsample script to not
break the YaST UI (bsc#1195116)
- 4.4.38 - Handle service name collision during upgrade (bsc#1194453),
do not delete the new services which have the same name
as an old service
- 4.4.37 - Adjusted Linux Security Module configuration wording
(related to jsc#SLE-22069).
- 4.4.36 - Enable RSpec verifying doubles in unit tests to ensue that
the mocked methods really exist (bsc#1194784)
- Fixed crash when importing an SSH configuration in AutoYaST
installation
- 4.4.35 - Show release notes button in progress in Qt interface
(jsc#SLE-20437)
- 4.4.34 - Updated yast2 dependency to ensure the new
Y2Packager::Resolvable.none? method is used (bsc#1194387)
- 4.4.33 - Do not propose Linux Security Module default configuration when
it is declared as not configurable in the control file or in the
AutoYaST profile (related to jsc#SLE-22069).
- 4.4.32 - Add support for selecting and configuring the desired Linux
Security Module during installation (jsc#SLE-22069)
- 4.4.31 - Self-update now supports relative URLs (relurl://), it defines
the self-update repository relatively to the main installation
repository (jsc#SLE-22669)
- 4.4.30 - Do not preselect any product during upgrade (related to
bsc#1192230).
- 4.4.29 - Improve the self-update process, do not read the products from
the installation medium (bsc#1193536)
- Adde more /etc/os-release replacements in the self-update URL
- 4.4.28 - Display the correct title in the welcome screen depending
on its content (related to bsc#1193223 and bsc#1192230).
- 4.4.27 - Display the product's license when only 1 product is available
in the online medium (bsc#1193223).
- Do not display the product's selector during upgrade
(kanderssen@suse.com, bsc#1192230).
- 4.4.26 - Drop support for subscription-tools, that package is not present
in SLE15 anymore (bsc#1193339)
- 4.4.25 - Do not crash when it is not possible to fetch the package
containing the release notes (bsc#1193148).
- 4.4.24 - Remove no longer used extra warning about destructive actions
before starting the installation process (related to bsc#1057437).
- 4.4.23 - bsc#1192626:
- Adapt the code to the new product specification API.
- Remove the code to handle the selected product from the
InstComplexWelcome client.
- 4.4.22 - Filter the installation proposals (in the Installation Settings
screen) according to the AutoYaST profile even before
tab switching (related to bsc#1190294)
- 4.4.21 - Remove obsolete prep_shrink client (with yast2-storage-ng such a
client is not needed anymore). - Fix file copying when using relurl:// and file:// naming schemes
(bsc#1191160).
- 4.4.20 - Release the sources and close the libzypp cache to allow
cleanly unmounting /mnt/var/cache/zypp directory (bsc#1189793)
- 4.4.19 - Display release notes during upgrade (bsc#1186044)
- 4.4.18 - Refactored umount_finish.rb (bsc#1149980)
More details: https://github.com/yast/yast-installation/pull/975
- Moved out the unmounting part to a new (testable!) Unmounter class
- Now using a dedicated FinishClient base class
- Killed a lot of YCP zombies
- Removed dead code going back to storage-old
- Modularized the code
- Made the client invokable stand-alone
- 4.4.17 - only list specific files installed in common directories (metainfo,
icons, fillupdir) (bsc#1184786)
- 4.4.16 - Activate devices before probing (bsc#1187220).
- 4.4.15 - Adapt code to Y2Users (part of jsc#PM-2620).
- 4.4.14 - Fix scope resolution for ::Users::UsersDatabase
(related to fate#319624)
- 4.4.13 - Export also the https_proxy environment variable when a proxy
config is given through linuxrc (bsc#1185016)
- 4.4.12 - Better evaluate the old and new repositories during upgrade,
do not preselect new repositories for removal if they
accidentally use the same repository as already present in
the system (bsc#1185822)
- 4.4.11 - Modify IP forwarding network configuration using the defaults
defined in the control file when selecting the role (bsc#1186280)
- 4.4.10 - The InstallationData class has been moved to yast2-packager
(related to the previous fix, e.g. bsc#1180888)
- 4.4.9 - Logging all available product information into directory
/var/log/YaST2/installation_info. This should help for evaluating
the cause of e.g. bsc#1180888, bsc#1180908, bsc#1178688.
- 4.4.8 - Fallback to ncurses when a X display is not opened after 15
seconds (bsc#1185095)
- 4.4.7 - Allow memory profiling of the main installer process, via
boot parameters: (bsc#1182649)
- MASSIF=1 enables Valgrind/Massif (C/C++ level)
- MEMORY_PROFILER=1 enables Ruby level
- 4.4.6 - Remove Yast::LanItems dependency (bsc#1185338)
- 4.4.5 - spec-cleaner part five out of five: sort and deduplicate requires
- 4.4.4 - spec-cleaner part two out of five: move conditionalized sections at the end
- spec-cleaner part three out of five: move weak requires (recommends) below requires
- spec-cleaner part four out of five: sort and deduplicate BuildRequires - remove check for non-systemd distros
- first out of 5 splits of "spec-cleaner -m -i *ec" run (for easier review) - Show 'Default' in the proposal summary as the PolicyKit Default
Privileges to be used when it is not specified or specified as
empty in the control file (bsc#1184277)
- 4.4.3 - Check for usr/lib/modules to handle usrmerge (bsc#1029961)
- 4.4.2 - Do not own system directories (like /usr/bin) (bsc#1184787):
+ filesystem is responsible to bring those directories with the
correct permission flags. Owning them here only introduces
races/conflicts.
+ As a result: expand the files section for bindir and unitdir to
be exact on the files. - Start the "memsample" tool in a subshell to avoid "Terminated"
message displayed at the end (bsc#1184491)
- 4.4.1 - Hide the abort button when the network client is called
(bsc#1183586).
- 4.4.0 - Expert console: fixed "shell" command
- Run X terminal in GUI instead of "dash" (related to the previous
fix for job control error messages bsc#1183648)
- Override TERM to "vt100" when running in fbiterm,
a workaround for frozen vim (bsc#1183652)
- 4.3.36 - Expert console: use "dash" if available instead of "bash" shell
to avoid job control error messages (bsc#1183648)
- 4.3.35 - Remove the libzypp cache symlink (related to bsc#1182928)
- Improved "memsample" script handling
- Do not start it again if it is already running
(might happen if YaST is started again after crash)
- Stop it when YaST finishes
- 4.3.34 - Do not trigger any kernel event with udevadm from the
kernel_finish client (bsc#1180535)
- 4.3.33 - Reduce self-update mechanism memory consumption (bsc#1182928):
- Make sure to download the package only once.
- Use a single squash file system for each update repository.
- Ignore unchanged files and directories like /usr/share/man,
/usr/share/info, etc.
- 4.3.32 - Added special installer configuration dialog
(jsc#PM-1895, jsc#SLE-16263)
- Can be started from the initial language selection dialog
using an "hambuger" button (openSUSE Tumbleweed only)
- Or in any dialog using a keyboard shortcut:
- Ctrl+Alt+Shift+C in graphical (Qt) UI
- Ctrl+D Shift+C in text mode (ncurses)
- 4.3.31 - Do not write selinux and polkit default rules during upgrade
(bsc#1182894)
- 4.3.30 - move properly security finish client (bsc#1182821)
- 4.3.29 - Fix previous change to include in proposal summary selinux
(jsc#SLE-17307)
- 4.3.28 - Add new security proposal and finish clients to replace firewall
one as the new clients contain also configuration for cpu
mitigation, policy kit default privileges (jsc#SLE-15840)
and selinux mode (jsc#SLE-17307)
- 4.3.27 - Adapted unit test to recent changes in Yast::Report (related to
bsc#1179893).
- 4.3.26 - Do not crash when it is not possible to create a snapshot after
installing or upgrading the system (bsc#1180142).
- 4.3.25 - Do not cleanup the libzypp cache when the system has low memory,
incomplete cache confuses libzypp later (bsc#1179415)
- 4.3.24 - Starting YAST2 Control Center if it has been set while an
yast2-firstboot installation workflow (bsc#1178834).
- 4.3.23 - correct add-on spelling (jsc#SLE-14772)
- 4.3.22 - fix full media product selection (bsc#1179094, bsc#1176424)
- 4.3.21 - Write hostname and proxy configuration to the inst-sys when
configured through linuxrc not only during an installation but
also when running an autoinstallation (bsc#1177768)
- 4.3.20 - yupdate - also make /usr/share/icons writable by default
(needed for updating yast2-theme) - Run configuration_management_finish client after *.repo files
are available in the installed system (bsc#1177522).
- 4.3.19 - Control.xml docu: Added "product_upgrades" tag in software/upgrade
(jsc#SLE-14807).
- 4.3.18 - Using ":" in the autoyast(...) supplements (bsc#1146494).
- 4.3.17 - Self-update improvement: write the list of updated packages to
the /.packages.self_update file in the inst-sys (bsc#1175614)
- 4.3.16 - save random pool to /var/lib/systemd/random-seed (bsc#1174964)
- 4.3.15 - AutoYaST: Added supplements: autoyast(deploy_image,ssh_import)
into the spec file in order to install this packages if the
section has been defined in the AY configuration file (bsc#1146494).
- 4.3.14 - AY: Removed "image" section from "software" section
(bsc#1140711).
- 4.3.13 - Handle exceptions when parsing xml file (related to bsc#1170886)
- 4.3.12 - handle device autoconfig setting in summary screen (bsc#1168036)
- 4.3.11 - Configure the wizard layout according to the product features.
- Related to jsc#PM-1998.
- 4.3.10 - Moving section handling from second installation stage
to first installation stage. (bsc#1174194)
- 4.3.9 - Do not use Profile.current unless necessary (bsc#1174173)
- 4.3.8 - Fix "Cmdline: parameter not set" for virt-install (bsc#1172139)
- 4.3.7 - copy NVMe hostnqn and hostid from installation system to target
system during installation (bsc#1172853)
- 4.3.6 - memsample: at install time sample memory consumption each 5s,
enabling CSV and PNG reports (bsc#1172139)
- startup/common/network.sh: remove bashisms to enable
switching inst_setup to dash
- 4.3.5 - Do not export to autoyast profile image deployment unless
requested (bsc#1172552)
- 4.3.4 - Improve the UX of the Previously Used Repositories dialog by
using more accurate labels. - Remove ssh_import section from AY when cloning (bsc#1172749)
- 4.3.3 - Fixed yupdate script to correctly install the needed Ruby gems
(bsc#1172793)
- 4.3.2 - Autoyast schema: Allow optional types for string and map objects
(bsc#1170886)
- 4.3.1 - remove obsolete proposal_settings_editable (bsc#1171423)
- 4.3.0 - Restore missing icons for ssh import and image deployment
auto clients (bsc#1168123).
- 4.2.42 - Force the use of en_US.UTF-8 when running firstboot or the
AutoYaST Second Stage with 'POSIX' or 'C as RC_LANG (bsc#1169017)
- 4.2.41 - In the proposal runner, restore the scroll only when it was
previously saved (bsc#1167248).
- 4.2.40 - Verify the package versions before applying the self-update
fixes (related to bsc#1163084)
- 4.2.39 - Drop few not needed recommends to have identical package on
opensuse and SLE (jsc#SLE-11936, jsc#SLE-11851)
- 4.2.38 - Add Abort confirmation for inst_welcome client used in firstboot
(bsc#1163347)
- 4.2.37 - Make sure to show release notes for add-on products (bsc#1158287)
- 4.2.36 - Added "yupdate" script to simplify patching the installer
(bsc#1163691)
- 4.2.35 - Rely on the new Y2Network::NtpServer class (jsc#SLE-7188).
- 4.2.34 - Allow to modify the control file at installation time using a
skelcd-* package (bsc#1164468).
- 4.2.33 - don't start getty on hvc0 & ttyAMA0 before Yast2-Firstboot (bsc#1157233)
- 4.2.32 - Fixed user-visible messages (bsc#1084015)
- 4.2.31 - Reimplemented the "Previously Used Repositories" dialog
(inst_upgrade_urls.rb) to properly evaluate the new and the old
system repositories (bsc#1159433)
- 4.2.30 - don't use /bin/systemctl compat symlink (bsc#1160890)
- 4.2.29 - Using tag $os_release_version in the control.xml file
(entry ) which will be replaced by the
value of VERSION in /etc/os-release. (improvement for fate#325834)
- 4.2.28 - use udevadm in /usr/bin instead of /sbin (bsc#1160890)
- 4.2.27 - drop starting of hal as it is also obsolete and no longer exist
(jsc#SLE-10976)
- drop deprecated network technologies (jsc#SLE-7753)
- replace rc* and init.d usage by systemd or start_service
depending if it runs in first stage or second (jsc#SLE-10976)
- 4.2.26 - Using Y2Packager::Resolvable.any? and Y2Packager::Resolvable.find
in order to decrease the required memory (bsc#1132650,
bsc#1140037).
- 4.2.25 - Do not remove /etc/install.inf from inst-sys (bsc#1122493,
bsc#1157476).
- 4.2.24 - Use linuxrc option "reboot_timeout" to configure the timeout
before reboot (bsc#1122493)
- 4.2.23 - Save and restore the proposal vertical scroll (related to a
problem reseting the scroll position reported in bsc#1143558)
- 4.2.22 - Improve the role selection dialog using a new scrollable widget
to select a role (related to bsc#1084674, bsc#bsc#1086187).
- 4.2.21 - Implement upgrade for the Full medium (jsc#SLE-7101)
- 4.2.20 - implement upgrade for online medium (jsc#SLE-7214)
- 4.2.19 - Adapted to new Keyboard handling.
- Checked also CLI suppot (bsc#1142957).
- 4.2.18 - fix crash when os-release contain empty value (bsc#1139518)
- 4.2.17 - Support for the offline installation medium (jsc#SLE-7101)
- 4.2.16 - do not stop haveged process (bsc#1140171)
- 4.2.15 - Support for the online installation medium (jsc#SLE-7214)
- 4.2.14 - do NOT remove /mnt/run, it's a mounted directory (bsc#1149011)
- 4.2.13 - Set X-SuSE-YaST-AutoInstResource in desktop file (bsc#144894).
- 4.2.12 - Using rb_default_ruby_abi tag in the spec file in order to
handle several ruby versions (bsc#1146403).
- 4.2.11 - Undo the change introduced in 4.2.7 because forcing the focus
is not a solution: now the it's always caught by the installation
summary after every action (related to bsc#1142353).
- 4.2.10 - Stop using the obsolete XVersion API (bsc#1144627)
- Detect missing textdomain during testing (bsc#1130822)
- 4.2.9 - Improve the detection of a forced base product
(bsc#1124590, bsc#1143943).
- 4.2.8 - Avoid to lost the focus in the proposal installation summary when
the user makes changes using the available options on it
(bsc#1142353).
- 4.2.7 - Copy multipath config files into the target system.
- Related to bsc#1133045.
- 4.2.6 - Use new schema of desktop files (boo#1084864)
- Clean up spec
- Rename desktop files
- 4.2.5 - Downloading files: Remounting CD with bind option correctly if
the CD has already been mounted (bsc#1132915).
- 4.2.4 - Make sure pkg target is active as long as still needed (bsc#1128385)
- 4.2.3 - Removed BuildRequires: yast2-ntp-client (causing dependency cycle)
(related to the previous fix bsc#1129095)
- 4.2.2 - Add a new installation dialog which allows to setup the NTP
servers (bsc#1129095).
- 4.2.1 - Use the select_product attribute from control file to filter
available products (bsc#1124590).
- 4.2.0 - revert SSH textmode patches (bsc#1129375, bsc#1047470)
- 4.1.45 - ensure that installation with VNC + textmode still installs
via VNC (bsc#1129073)
- 4.1.44 - Update the hard-coded fallback path for licenses directory
(fate#324053, jsc#SLE-4173)
- 4.1.43 - Fix patterns and packages selection when going back to the system
role selection (bsc#1126517).
- 4.1.42 - Retranslate also the side bar steps when changing the language
(bsc#1128153)
- 4.1.41 - Do not change polkit default privileges during upgrade
(bsc#1120720)
- 4.1.40 - Do not write the displaymanager value (part of bsc#1125040).
- 4.1.39 - Respect Textmode=1 when installing over SSH with a DISPLAY (bsc#1047470)
- 4.1.38 - copy_files_finish: ensure that /mnt/etc/YaST2 exists (bsc#1127182).
- 4.1.37 - Save the used repositories at the end of installation to not
offer the driver packages again (bsc#953522)
- 4.1.36 - Copying SSH keys from a privious installation into the new one:
Set the right file permissions for the SSH deamon (bnc#1122303).
- 4.1.35 - remove no longer used SCR agents without replacement:
sysconfig.boot, sysconfig.fam, etc.passwd and
install_inf workarounds for aliases and options
- remove no longer used clients:
- inst_ask_online_update replaced by registration for SLE and
online_repos for openSUSE.
- inst_check_autoinst_mode dropped without replacement. Floppy
support was dropped.
- inst_scenarios replaced by system roles.
- update_wizard_steps replaced by direct call of code without
client - Hardening commands execution (part of bsc#1118291).
- Replace backticks by Yast::Execute.
- 4.1.34 - always use absolute path to binaries (bsc#1118291)
- properly escape shell arguments (bsc#1118291)
- 4.1.33 - More aggresive inst-sys cleaner, clean the libzypp cache
when running in graphical mode with less than 1GB RAM
(in text mode keep the current limit 640MB), this avoids
crashes on low memory systems (bsc#1118643)
- Also adapted the computing the default y2log size - use
smaller size in low memory systems, on the other hand limit the
maximum size to avoid huge log files
- 4.1.32 - Improved saving y2logs during installation to use the /mnt/tmp
space instead of the RAM disk to avoid possible crash (out of
memory) (bsc#1118643)
- 4.1.31 - Provide icon with module (boo#1109310)
- 4.1.30 - Documented new control.xml global parameter enable_local_users
(Fate#326447)
- Improved English in the documentation of control.xml
- 4.1.29 - Prefer fbiterm whenever is possible for textmode installation
(fate#325746).
- 4.1.28 - Dialog complex_welcome: Translate the help button if the language
has been changed (bsc#1098571).
- 4.1.27 - Moving driver_update2_finish call just before unmounting system.
(bnc#967103).
- 4.1.26 - Writing security settings in first AY installation stage.
So other modules (e.g. users) can rely on these settings now.
(bnc#1112769)
- 4.1.25 - extra_urls: compare unexpanded urls, so two identical
repositories with variables are detected (bsc#1090193)
- 4.1.24 - Added save_y2logs client. (fate#325737)
- 4.1.23 - Remember the selected role (related to FATE#325834)
- 4.1.22 - Saving y2logs after the installation has been finished.
(fate#325737)
- 4.1.21 - Fixed path to license file. . Build error in fate#324713
- 4.1.20 - Skip the roles' dialog selection when there is only one available
(fate#324713)
- 4.1.19 - Fix syntax error (bsc#1109659)
- 4.1.18 - Updated docu for add_on_products.xml: Added tag "confirm_license"
to handle Add-On-products licenses which will be added while
installation. (bsc#1105758)
- 4.1.17 - Avoid to restore old backups when upgrade fails (bsc#1097297)
- 4.1.16 - Copy the selected packages from the self-update repository to an
additional add-on repository, allow updating the installation
workflow from the self-update repository (bsc#1101016)
- 4.1.15 - do not translate snapshot description (bsc#1092757)
- 4.1.14 - Use /media.1/media instead the /media.1/build (bsc#1062297)
- 4.1.13 - Add missing help for disks activation dialog (bsc#1098563)
- 4.1.12 - Improve help text for system roles (bsc#1046619)
- 4.1.11 - Update calls to YaST2 systemd classes (related to fate#319428)
- 4.1.10 - Add an option to have a sidebar (boo#1088785)
- 4.1.9 - Switched license in spec file from SPDX2 to SPDX3 format.
- Changed dir of COPYING file. - Disable display of status messages on the console (bsc#1099505).
- 4.1.8 - Don not print errors if plymouth is not installed (bsc#1101879) - Do not crash if /etc/os-release is a directory (bsc#1097661)
- 4.1.7 - Delete unneeded content of /mnt/run after installation/update.
(bsc#1071745)
- 4.1.6 - Fixed returned value calling copy_files_finish when
some ssh file exist (bsc#1099104).
- 4.1.5 - Added additional searchkeys to desktop file (fate#321043).
- 4.1.4 - adapted testsuite to change in yast2-storage-ng (bsc#1073633)
- 4.1.3 - Firstboot.service: Shutdown on failure preventing the service to
hang because of a systemd dependency when trying to call halt
directly from the firsboot clients (bsc#1095253)
- 4.1.2 - Fixed possibly broken system after aborting upgrade running
over SSH (caused by a partially finished rollback) (bsc#1089643) - fix calling copy_files_finish to not crash
(related to bsc#1095323)
- 4.1.1 - Fix crash caused by previous fix when multipath is not available
(bsc#1095323)
- Copy active_devices.txt for s390 to prevent blocking of
important devices when cio_ignore is active (bsc#1095033)
- 4.1.0 - Fix installation mode detection (related to bsc#1089547).
- 4.0.61 - Do not try to set read-only property to default BTRFS subvolume
if the filesystem already existed on disk (needed for
bsc#1091047).
- 4.0.60 - Log a warning when umounting a filesystem fails after
installation/upgrade (related to bsc#1090018).
- 4.0.59 - disable mdadm auto assembly for installation (bsc#1090690)
- 4.0.58 - Keep the selected product in the desktop selection dialog
(bsc#1088660)
- 4.0.57 - Copy new /var/log/YaST2/storage-inst/ subdir to target at the
end of the installation (part of fate #318196)
- 4.0.56 - Do not warn too soon about missing disks during autoinstallation
(bsc#1091033)
- 4.0.55 - Better handle the restore scripts when YaST is aborted or
crashes (bsc#1089643)
- Delete the .repo files accidentally saved into inst-sys
(fixes problems when restarting YaST after abort or crash)
- 4.0.54 - fix regression to show again iscsi configuration for disk-less
setup (bsc#1090753)
- 4.0.53 - Fix text direction for RTL languages in the installer settings
screen (bsc#1089846).
- 4.0.52 - Fixed "vnc.sh: /root/.profile: No such file or directory"
(bsc#1089623).
- 4.0.51 - Log more details when unmounting the target partition fails
(to debug bsc#1090018)
- 4.0.50 - Installer Updates does not overwrite Driver Updates
(bsc#1088685).
- 4.0.49 - Don't hard-code the role text color (bsc#1087399).
- 4.0.48 - Ensure proper patterns are selected when going back to system
role and switch to different role (bsc#1088883)
- 4.0.47 - Set Add-On products for installation again after the base
product has been selected (bnc#1086846).
- 4.0.46 - Use AbortException when user aborts (part of fate#318196).
- 4.0.45 - Start web VNC for the installation process (bsc#1078785)
- 4.0.44 - Fix tests to use correct storage instance (part of fate#318196).
- 4.0.43 - System roles: make the radio buttons match other dialogs,
using images (bsc#1084674)
- 4.0.42 - Make many system roles fit in the dialog (using a RichText
widget, bsc#1084674)
- 4.0.41 - Self-Update report errors when the self_update is enabled
explicitly by linuxrc or using an AutoYaST profile.
(bsc#1084820)
- 4.0.40 - Set the 'ro' property on Btrfs filesystem when using an AutoYaST
profile which sets the 'ro' option explicitly (related to
bsc#1079000).
- 4.0.39 - complex_welcome: Translate license text if the language has been
changed (bnc#1077733).
- 4.0.38 - Set Btrfs 'ro' property at the end of the installation
when needed (bsc#1079000)
- 4.0.37 - Pass args to parent class constructor (bsc#1083500)
- 4.0.36 - fix marking texts for translation (bsc#1081361, bsc#1083015)
- 4.0.35 - More gentle handling of aborts caused by hardware probing errors
(bsc#1079228, bsc#1079817, bsc#1063059, bsc#1080554, bsc#1076776,
bsc#1070459 and some others).
- Re-enable the old fix for bsc#298049 (abort button during ongoing
hardware probing).
- Cleanup of dead code
- 4.0.34 - Ensure previous role selection is cleared when doing desktop
selection (bsc#1078961)
- 4.0.33 - Startup scripts: Replaced xinetd by xvnc.socket (fate#323373)
- Revert changes added in 4.0.29 bringing back the enablement of
the xvnc.socket during the first stage if Linuxrc.vnc is set.
(bnc#1077236)
- 4.0.32 - Added requirement iproute2 to spec file. This is needed by
the VNC AutoYaST installation in the second stage.
(Follow up of bnc#1077236)
- 4.0.31 - do not crash if no role is selected (bsc#1078809)
- 4.0.30 - Provides the current language when asking for the product's
release notes to the yast2.rpm API (related to bsc#1079045).
- 4.0.29 - Do not enable xvnc.socket for second installation stage.
Xvnc will be started by a direct call in vnc.sh. (bnc#1077236)
- 4.0.28 - Reimplemented finding package upgrades to require less memory
(related to bsc#1076768)
- 4.0.27 - Start performing real installation with as much memory as
possible (bsc#1076768)
- 4.0.26 - Read the root_subvolume_read_only setting from its new location
(moved by libstorage-ng) in the control file (boo#1077047).
- 4.0.25 - save keyboard settings before console settings (bsc#1076798)
- 4.0.24 - Update YaST2-Firstboot.service: Depreciate plymouth --wait, add
conflict to plymouth start service.
- Update YaST2-Second-Stage.service: Depreciate plymouth deactivate
command and add conflict to plymouth start service. For that will
block TTY device activation(bsc#1042554).
- 4.0.23 - Fix initialization to copy the profile to /tmp/profile again
(bsc#1075334)
- 4.0.22 - Fixed popup layout for bnc#1061754.
- 4.0.21 - Warn the user if the infrastructure is not available for running
the second stage (bnc#1061754)
- 4.0.20 - Removal of SYSTEMCTL_OPTIONS environment variable (fate#323393)
- 4.0.19 - drop copy_to_system support (FATE#320873)
- 4.0.18 - Log the system name at start to see which system is running
in the inst-sys (for easier debugging) - Replaced Remote module by the new y2remote/remote class
(bsc#1070582)
- Updated yast2-network dependency.
- 4.0.17 - Filter out modules extensions based on product, using white list
approach (fate#324198)
- 4.0.16 - Break autoyast2 and yast2-installation dependency cycle
(bsc#1070996)
- 4.0.15 - Do not ignore start_multipath setting (bsc#1070343).
- 4.0.14 - Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468). - Unify firewall proposals and finish clients replacing
firewall_stage1_finish by firewall_finish. (fate#323460)
- 4.0.13 - Cleanup old registration attempts before starting Installer. This
is needed for restarted installation after it has been aborted
earlier (bsc#1065167).
- 4.0.12 - Always show the license agreement on single product media,
even during upgrade (bsc#1065172)
- 4.0.11 - Less eager inst-sys cleanup, libzypp actually needs some cached
files during package installation, remove only the white listed
known files (bsc#1063459)
- 4.0.10 - umount efivars properly (bsc#1063063)
- 4.0.9 - Write polkit settings even if no desktop is selected
(bsc#1062788)
- 4.0.8 - Adapted complex welcome client allowing to continue with the
installation when there are no products available. (bsc#1059070)
- 4.0.7 - Dropped call of dasd_reload which caused renumbering of disks and
user got confused.(FATE#318138)
- 4.0.6 - AY: Warn the user if an remote installation is not completely
possible because there are not all needed packages availble in
the installed system. (bnc#1055279, bnc#1058071)
- 4.0.5 - Add support to read release notes from an RPM in the
repository (fate#323273)
- 4.0.4 - Add support for system roles ordering (related to bsc#1049297) - Do not allow changing the selected base product on an already
registered system (bsc#1060252) - Re-activated the step to search for system files (users and SSH
keys) in existing systems. It was temporarily disabled during the
migration to storage-ng (part of fate#323837).
- 4.0.3 - Removed obsolete inst_info client which is not used anymore.
(bsc#1047060)
- 4.0.2 - Adapt to new yast2-country changes (needed for FATE#323837)
- 4.0.1 - Download release notes only for the selected products (if any
product is already selected) (bsc#1056872)
- 4.0.0 - Fix license confirmation handling on single product medias
(fate#322276)
- 3.3.13 - Configure Snapper at the end of installation if requested
(part of fate#318196).
- 3.3.12 - On multi-product installation medias, the product selection
happens in the welcome screen (fate#322276)
- 3.3.11 - Skip complex welcome module in auto mode.
- 3.3.10 - Show README.BETA if it exists (bsc#1047060)
- 3.3.9 - Show the product's license from libzypp in the welcome screen
(FATE#322276)
- 3.3.8 - Replace Installation::Product and Installation::ProductReader
classes by Y2Packager::Product and Y2Packager::ProductReader
(related to FATE#322276)
- 3.3.7 - Merged storage-ng branch to master (fate#318196)
- Note: all changes below with this date belong to the merge.
- 3.3.6 - storage-ng: adapted to the new Y2Storage::StorageManager API
and improved probing and activation of storage devices. - adapted inst_disks_activate.rb to storage-ng - storage-ng: Taking /usr/bin/findmnt in order to evaluate mount
points. Floppy support removed. - storage-ng: use the new library for storage hardware probing
(devicegraph) instead of the old one (targetmap) - storage-ng: removed dependency from (old) yast2-storage, even
if it breaks some functionality. - storage-ng: commented installation-related code relying on the
old yast2-storage - Fix crash when going back from product selection (FATE#323450)
- 3.3.5 - Allow using base products from additional repositories
(FATE#323450)
- 3.3.4 - New client for product selection (FATE#323450)
- 3.3.3 - drop reading /content (FATE#322386)
- 3.3.2 - openSUSE only: reword title of desktop selection dialog
(boo#1045180)
- 3.3.1 - when custom role is selected in desktop selection
keep default value in /etc/sysconfig/windowmanager (bsc#1030873)
- 3.3.0 - Allow different mount point for home partition (Fate#323532)
- 3.2.46 - install the yast2-registration package only in SLE (bsc#1043122)
- 3.2.45 - "custom" roles: Initialize pattern selection screen with settings
defined in the control files. (bnc#1031295)
- 3.2.44 - Do not lose the desktop selection when the online repositories is
pressed. (bsc#1033594)
- Do not allow to continue without desktop selection. (bsc#1040884)
- 3.2.43 - Fixed path to the "adddir" command (it is /sbin instead of /etc)
(bsc#1041882)
- 3.2.42 - Added requirement of 'cwm/widget' in hiding_place as consequence
of changes made in CWM. (boo#1039901).
- 3.2.41 - Fixed push button label ("Configure Online Repositories")
(bsc#1039988)
- 3.2.40 - Don't crash if the regurl provided by linuxrc is invalid using
the one provided by the control file as fallback (bsc#1035908).
- 3.2.39 - Move CaaSP specific code to yast2-caasp package
(bsc#1036838)
- 3.2.38 - bsc#1031840
- changed CheckFreeSpaceNow to use LANG=en_US.UTF-8 - Add a NTP Servers settings to the overview dialog
(FATE#323249) - Use y2start script instead of y2base (bsc#1027181)
- 3.2.37 - Added configuration-management to inst_finish.
(FATE#319830)
- 3.2.36 - Renamed Controller Node to Administration Node (bsc#1032057).
- 3.2.35 - Move CaaSP specific code to yast2-caasp (bsc#1030874)
- 3.2.34 - Use the shared package download and extraction functionality
from FATE#320772
- 3.2.33 - Added some extra space to the openSUSE desktop/roles selection
dialog (improvement on the fix for poo#14936, bsc#1025415).
- 3.2.32 - Allow proceeding with the installation after a blocking condition
has been corrected in the overview dialog (bsc#1029291).
- 3.2.31 - Improve roles buttons distribution in textmode (related to
FATE#320772)
- 3.2.30 - Fix desktop selection during installation (bsc#1029312)
- 3.2.29 - Support to add roles through addons (FATE#320772)
- 3.2.28 - fix crash when reading if desktop role should have default
pre-selected (bsc#1025415)
- 3.2.27 - Really use the directory.yast file (fate#322372)
- 3.2.26 - fate#322328
- adapted all-in-one dialog according to comments from UX
- 3.2.25 - CaaSP: do not crash when used a dashed url for the controller
node location (bsc#1024965)
- CaaSP AY: Adapted requirements of yast2-services-manager.
(FATE#321738)
- bnc#1022546
- update all-in-one's subdialog (network/kdump/partitioning/...)
overview when the dialog is closed and do not lose another
content already entered by user.
- 3.2.24 - Add new desktop selection client for opensuse based on roles
(poo#14936, bsc#1025415)
- drop "inst_new_desktop" client which was replaced by new desktop
selection one
- 3.2.23 - Self-Update only shows errors when a custom URL is used
(bsc#1025251)
- 3.2.22 - CaaSP all-in-one-dialog: added validation to the controller node
location field, modified label and write it to the minion
master.conf file at the end of the installation (FATE#321738)
- CaaSP: Display the Beta product warning at start when it is
present (bsc#1016887)
- Enable CaaSP specific services on the installed system
(FATE#321738)
- Do not crash if role contain own service to enable (bsc#1022762)
- 3.2.21 - Downloading release notes: Do not download them at all during
AutoYaST (bsc#1009276)
- Use the directory.yast file to check avilable
translations (fate#322372)
- 3.2.20 - Downloading release notes: Do not try again if the host or the
proxy cannot be resolved (bnc#1022784)
- 3.2.19 - Ask for installation confirmation in all-in-one dialog before
proceed with it. (Fate#322328)
- 3.2.18 - Respect newly registered update repos in software proposal and
do register. (FATE#322328) - handle proposal errors in all-in-one dialog (FATE#322328) - Added an all-in-one installation overview for CaaSP (FATE#322328) - Add an option to disable the self-update feature through the
AutoYaST profile (FATE#319716)
- 3.2.17 - bnc#1017752
- do not show language change warning in software proposal
incorrectly when language was not changed.
- 3.2.16 - Do not retry to download release notes if a previous attempt
failed (bsc#1015794)
- 3.2.15 - add ability to roles to enable list of services when selected
(FATE#321754) - fate#321739
- Made user's interaction possible in case of error in read-only
proposal.
- 3.2.14 - AutoYaST after second stage: Initialize tty1 in order to remove
old YaST output and to show the cursor again.
(bnc#1018037)
- 3.2.13 Port changes from CASP1.0:
- Change layout of new installation dialog according to UX team
suggestion (FATE#321754)
- Set root subvolume read-only if configured (Fate##321755)
- Document new control.xml parameter root_subvolume_read_only
- Add new installation dialog with keyboard layout and root
password (FATE#321754)
- Added worker role dialog (Fate#321754)
- implement support for running additional dialogs for specific
roles (FATE#321754)
- Added description for readonly_timezone and
clone_install_recommended_default flag in control-file
documentation. (Fate#321754, Fate#321764)
- 3.2.12 - Do not crash when the proposal screen is configured through
an AutoYaST profile and tabs are not being used (bsc#1013976)
- 3.2.11 - fix missing icon next to SSH Key Import in autoyast
(bsc#988377) - add missing file causing crash (introduced with generic fix of
bsc#1003682)
(invisible in master since autotools support is dropped there)
- 3.2.10 - Documentation for new storage related parameters in control.xml
(Fate#321736) - The user has to confirm when the configuration proposal contains
a non-blocking error (generic fix for bsc#1003682)
- 3.2.9 - Fixed bug: AutoYaST hangs while running second stage.
Removed network.service in the Before section of
YaST2-Firstboot.service. (bnc#1007752)
- 3.2.8 - Do not crash if importing ssh config from system which
/etc/os-release does not contain pretty name (bsc#1009492)
- 3.2.7 - Added support for read-only proposal modules (fate#321739)
- 3.2.6 - Documentation for subvolumes in control.xml (fate#321737) - more robust password filtering in y2start.log
(bsc#798966)
- 3.2.5 - Set libyui-ncurses environment before starting the installer
(related to bsc#780621)
- 3.2.4 - Bump version number to release fixes for bnc#999895,
bsc#988700 and bnc#999953.
- 3.2.3 - AutoYaST upgrade: Do not override the Report module settings in
the AutoYaST upgrade mode, keep the previous settings
(bnc#999895). - Translate description of Snapper snapshots (bsc#988700)
- 3.2.2 - Fixed crash if one defined proposal module has not been found on
system while switching back from "Expert" proposal.
(bnc#999953)
- 3.2.1 - reduce time needed for building this package
- 3.2.0 - fix skipping of proposal returning empty hash otherwise it
creates non sense proposal entry in UI (bnc#994127)
- 3.1.215 - Display a warning popup when the installer self-update uses
the fallback URL instead of the selected SMT or the default SCC
server (bsc#996179)
- Do not contact the registration server in self-update when
network is not running, skip self-update completely
- 3.1.214 - Move the installer self update step earlier in the workflow
so the user entered values are not lost after restart and avoid
repeating some steps again (bsc#985055)
- This also fixes losing some values due to restaring YaST (bsc#993690),
(bsc#992608)
- Improved the self update URL handling - the boot parameter has
the highest priority, always ask user when a SLP service is found,
in AutoYaST mode SLP needs to be enabled in the profile
- Display progress when downloading and applying the updates
- 3.1.213 - Replace unicode bullet char by asterisk for ncurses (bsc#995082)
- 3.1.212 - fix writing proposals (bnc#994127)
- 3.1.211 - filter out same repositories from extraurls if they differ only
in trailing slash (bnc#970488)
- 3.1.210 - SSH Importer: Width fix to avoid cut of CheckBoxFrame Label
(fate##319624)
- 3.1.209 - Fixed testsuite for inst_complex_welcome after implementing lazy
loading in ProductLicense in yast2-packager (bsc#993285)
- 3.1.208 - Fix the registration screen initialization when SCC server
is used during self-update (FATE#319716)
- 3.1.207 - Retrieve the self-update URL from the registration
server (SCC/SMT) (FATE#319716)
- 3.1.206 - UI, UX and internal handling for the Welcome screen optimized to
prevent from not showing that the license needs to be accepted
(bsc#980374).
- 3.1.205 - If the user has skipped multipath activation, don't ask again
after installer self-update (bsc#989770)
- 3.1.204 - Don't halt the installation if installer updates server
cannot be reached when using AutoYaST (bsc#988949)
- 3.1.203 - simplify and speed up inst_finish client (bnc#986649)
- add test suite for inst_finish client
- 3.1.202 - Run extra inst-sys cleanup to free more memory on systems with
low memory (bsc#974601)
- 3.1.201 - Properly adjust the OOM killer (oom_score_adj has a different
range than the original oom_adj) (bsc#974601)
- 3.1.200 - Added AutoYaST schema file "ssh_import".
(fate#319624)
- 3.1.199 - Make writing of bootloader settings the last step so that other
installation steps (kdump, cio-ignore) do not have to waste time
repeating it
(bnc#986649)
- 3.1.198 - Display more information in the error popup when downloading
the optional installer updates fails (bsc#986091)
- 3.1.197 - Avoid restarting YaST when self-update repository exists but
is empty (bsc#985113)
- 3.1.196 - call set_videomode to adjust video mode (bsc#974821)
- 3.1.195 - Fix architecture detection during self-update (bsc#984656)
- 3.1.194 - Adapt AutoYaST to support import of SSH server keys/configuration
(fate#319624)
- 3.1.193 - Drop yast2-installation-devel-doc package (fate#320356)
- 3.1.192 - When importing SSH keys/configuration, only regular files
will be considered (bsc#982522)
- Force YaST2-Firstboot.service to run after
YaST2-Second-Stage.service (bsc#980365)
- 3.1.191 - Move the debugger invocation code to yast2-ruby-bindings package
to use the same implementation at run time (FATE#318421)
- 3.1.190 - System Role: centered dialog (ncurses). - More visual improvements in the SSH keys importing proposal
summary based on blog entry feedback. (Fate#319624)
- 3.1.189 - Start the Ruby debugger at the beginning of installation
when Y2DEBUGGER is set (FATE#318421)
- 3.1.188 - Visual improvement in the SSH keys importing proposal summary - The user is now informed about SSH keys to be reused (copied
from a previous system) during system installation.
- The user can select a different partition (or none) to read the
keys from and whether to also copy config files.
- SSH import functionality not longer depending from
"copy_to_system" feature.
- Fate#319624
- 3.1.187 - SSH installation: handle closing the initial installation screen
by the window manager close button (bsc#979499)
- 3.1.186 - Do not copy licenses from inst-sys to target system.
Showing EULA location in the installed system.
(fate#219341)
- 3.1.185 - get more texts for roles dialog from control file, allow
a general label (bsc#974625)
- 3.1.184 - Always read the lists of local users in the previous system to
have them available during user importing (part of fate#319624)
- 3.1.183 - Disk Activation step will be skipped in case of installer update
success (bsc#974409)
- License agreement will be remembered in case of going back after
a installer update.
- 3.1.182 - Fix handling of license acceptance in welcome screen
(bsc#975774)
- 3.1.181 - Run the automatic installer self update also in the AutoYaST
mode, read the optional custom URL from the profile ("general" ->
"self_update_url" node) (FATE#319716)
- 3.1.180 - bsc#956473
- improved formatting of network interfaces listing
- 3.1.179 - do not install perl-Bootloader-YAML on target system as it is no
longer needed (FATE#317701)
- 3.1.178 - Automatic update during installation will use Zypper repositories
instead of Driver Update Disks (FATE#319716).
- 3.1.177 - Moved proc_modules.scr to yast2.rpm to avoid that yast-sound
depends on yast-installation (bsc#972310)
- 3.1.176 - Added automatic update during installation (FATE#319716)
- 3.1.175 - System Role: align labels (FATE#317481).
- System Role: pop-up if changing the role to a different one.
- 3.1.174 - Moved Yast::Transfer::FileFromUrl here from yast2-update
(FATE#319716).
- 3.1.173 - Added a System Role step in the installation (FATE#317481).
- 3.1.172 - bsc#956473
- network interfaces listing shows all IPv4 / IPv6 addresses per
device
- 3.1.171 - Ensure plymouth does not interfere with X11 when executing
yast2-firstboot (bsc#966874)
- 3.1.170 - bnc#960703
- network service setup moved into yast2-network package.
- 3.1.169 - Remove autoyast clone button (fate#317970)
- 3.1.168 - Removing network dependencies in the service files in order to
prevent booting cycles in Tumbleweed. (bnc#954908)
- 3.1.167 - fixed function name to check zKVM hypervisor (bsc#956736)
- 3.1.166 - don't enforce the disk activation dialog on zKVM (bsc#956736)
- 3.1.165 - Ensure second stage and YaST-Firstboot don't get killed by
getty when running over 2nd or 3rd serial console (bsc#935965)
- 3.1.164 - Do not crash in proposal client if zfcp proposal reports itself
as unavailable (bnc#956745) - Save the software selection for using it later in AutoYaST
when deploying installation images (bsc#956325, bsc#910728)
- 3.1.163 - Ensure second stage and YaST-Firstboot don't get killed by
getty when running over serial console (bsc#935965)
- 3.1.162 - Language selection screen fixed to immediately apply the keyboard
layout after changing it automatically (bsc#947969).
- 3.1.161 - Simplified second stage systemd unit to avoid dependencies cycles
(bnc#947521 and bnc#931643). Logic moved to YaST startup scripts.
- 3.1.160 - fix bug preventing to finish proposal in some sutuations
(bsc#944334)
- 3.1.159 - Fixed setting language / languages in the installation welcome
screen (bsc#943746, bsc#944035)
- 3.1.158 - Move #second_stage_required? method to InstFunctions module
to be used by AutoYaST (bnc#892091)
- 3.1.157 - fixed cio_ignore testcase
This testcase is for bnc#941406
- 3.1.156 - AutoYaST S390: handling cio_ignore
Entry in order to set it
(values: true/false). If it is not set cio_ignore is true.
So it is backward compatible.
(bnc#941406)
- cio_ignore does not make sense for KVM or z/VM. So checking
for KVM and z/VM and evtl. disabling cio_ignore (fate#317861).
- 3.1.155 - AutoYaST second stage: YaST2-Second-Stage.service
Continue installation even if plymouth has returned an error.
(bnc#940878)
- 3.1.154 - Fix release notes loading when network is not working (bsc#940648)
- 3.1.153 - store cio_ignore settings before installing bootloader
(bsc#933177)
- 3.1.152 - avoid duplicating release notes for products (bsc#935599)
- 3.1.151 - Moved client code to lib/installation/clients to enable test
coverage measurements.
- 3.1.150 - Cleanup for snapshots made during installation (bnc#935923)
- 3.1.149 - Fixed handling user request to change an installation proposal
(bsc#936448)
- 3.1.148 - fixed menu button label in the proposal (bsc#936427)
- 3.1.147 - add ability to hide export button (fate#315161)
- 3.1.146 - Implemented triggers for installation proposal (FATE#317488).
Any *_proposal client can define 'trigger' in 'MakeProposal'
that defines in which circumstances it should be called again
after all proposals have been called, e.g., if partitioning or
software selection changes.
- 3.1.145 - fix crash in Upgrade when creating post upgrade snapshot
(fate#317973)
- 3.1.144 - add a client to create a snapshot after installation/upgrade
(fate#317973)
- 3.1.143 - set Xvnc server resolution to 96 dpi to fix broken layout in VNC
installations (defaults to 75 dpi) (bsc#919456)
- 3.1.142 - Fixed an error preventing the VNC connection during second
installation stage of AutoYaST when using VNC=1 (bnc#923901)
- 3.1.141 - Fixed differnt bugs in proposal overview with multiple tabs.
- Checking if plymouth is available while starting second
installation stage for AutoYaST.
- 3.1.140 - Always enable systemd startup services for Second Stage and
Firstboot (bsc#924278)
- 3.1.139 - avoid endless loop when confirm update in proposal runner
(FATE#315161)
- 3.1.138 - fix method missing error in proposal_runner (FATE#315161)
- 3.1.137 - fix dependencies in proposal_store (FATE#315161)
- 3.1.136 - allow proposal runner dialog to use different proposal store
(FATE#315161)
- 3.1.135 - get list of mounts from /proc/mounts in umount_finish (for
fate#318392)
- 3.1.134 - Delete or copy install.inf as applicable (bnc#897066)
- 3.1.133 - removed redundant initialization label (bnc#878538)
- 3.1.132 - The unit tests are now compatible with RSpec 3 (bnc#916364)
- 3.1.131 - support custom display number in "display_ip" boot option
(bnc#913888)
- 3.1.130 - AutoYaST: If the system starts in multi-user mode plymouth will
be quit while installation in order to ensure that installation
will be finished on console 1 and the login prompt will be
shown.
(bnc#903682,889757,897956) - allow keyboard layout testing in language dialog (bsc#889549)
- 3.1.129 - explicitely set language packages for installation during the
live install (bnc#904103)
- 3.1.128 - fix typo causing error in installation ( catched by openQA ) - Properly install new Proposal* libs to fix installation - Refactored inst_proposal into Installation::ProposalRunner and
Installation::ProposalStore.
- 3.1.127 - fixed progress bar during (live) image installation (bsc#854378) - do not stuck during copy of logs files (bnc#897091)
- 3.1.126 - Fix bashisms and shebangs in scripts (by "Ledest")
- 3.1.125 - drop check for Gtk since Gtk UI of YaST is no longer supported
(bsc#908607)
- 3.1.124 - remove X-KDE-Library from desktop file (bnc#899104) - Added more debug information in order to track bnc#897091
- 3.1.122 - Merging changes from 3.1.116.1 (SLE12 maintenance branch)
- Fixed the "previously used repositories" step to work properly
when reached using the back button (bnc#889791)
- 3.1.121 - Improve dialog asking if system should be cloned (bnc#900028)
- 3.1.120 - AutoYaST Second Stage: Fixed a crash in package management when
running in Qt UI with libproxy1-config-kde4 package installed.
(bnc#866692)
- 3.1.119 - do not write obsolete /etc/syconfig/boot RUN_PARALLEL key
(bnc#896207)
- 3.1.118 - properly setup locale in installation start script to display
texts and labels correctly in a texmode installation and also
to translate all buttons in graphical mode (removed "testutf8"
calls, it has been dropped, always set UTF-8 locale) (bnc#902411)
- 3.1.117 /bin/sh /bin/sh /bin/sh /bin/sh yast2-installation-devel-doc sheep64 1687332543
! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~
! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 4.4.59-150400.3.18.1
! ! ! ! ! " " " # $ % % % & ' (memsample memsample-archive-to-csv memsample-csv-plot yupdate startup AUTHOR First-Stage F02-hwinfo F03-umount F04-language F05-cmdline F06-terminal F08-logging F09-start F10-cleanup Second-Stage S02-logging S03-autoconf S04-language S05-config S06-services S07-medium S08-start S09-cleanup YaST2.First-Stage YaST2.Second-Stage YaST2.call YaST2.ssh common arch.sh functions.sh language.sh logging.sh misc.sh network.sh stage.sh vnc.sh hooks postFirstCall postFirstCall.readme postFirstStage postFirstStage.readme postSecondCall postSecondCall.readme postSecondStage postSecondStage.readme preFirstCall preFirstCall.readme preFirstStage preFirstStage.readme preSecondCall preSecondCall.readme preSecondStage preSecondStage.readme requires YaST2-Firstboot.service YaST2-Second-Stage.service clients cio_ignore_finish.rb cio_ignore_proposal.rb complete_workflow.rb copy_files_finish.rb copy_logs_finish.rb deploy_image_auto.rb deploying_proposal.rb desktop_finish.rb disintegrate_all_extensions.rb driver_update1_finish.rb driver_update2_finish.rb inst_addon_update_sources.rb inst_complex_welcome.rb inst_congratulate.rb inst_custom_patterns.rb inst_deploy_image.rb inst_desktop_roles.rb inst_disk_for_image.rb inst_disks_activate.rb inst_doit.rb inst_download_release_notes.rb inst_extrasources.rb inst_features.rb inst_finish.rb inst_initialization.rb inst_install_inf.rb inst_installation_options.rb inst_instsys_cleanup.rb inst_keyboard_root_password.rb inst_license.rb inst_modules_extensions.rb inst_network_check.rb inst_ntp_setup.rb inst_pre_install.rb inst_prepare_image.rb inst_prepareprogress.rb inst_product_selector.rb inst_proposal.rb inst_release_notes.rb inst_restore_settings.rb inst_rpmcopy_secondstage.rb inst_save_hardware_status.rb inst_ssh_import.rb inst_system_analysis.rb inst_system_role.rb inst_update_installer.rb inst_upgrade_urls.rb inst_welcome.rb inst_worker_continue.rb inst_worker_initial.rb installation.rb installation_settings_finish.rb kernel_finish.rb ldconfig_finish.rb network_finish.rb pre_umount_finish.rb proxy_finish.rb remote_finish.rb roles_finish.rb save_config_finish.rb save_hw_status_finish.rb save_y2logs.rb security_finish.rb security_proposal.rb services_finish.rb snapshots_finish.rb ssh_import_auto.rb ssh_import_proposal.rb ssh_settings_finish.rb stroj-casu.rb switch_scr_finish.rb test_inst_client.rb test_proposal.rb umount_finish.rb x11_finish.rb yast_inf_finish.rb include installation inst_inc_all.rb inst_inc_first.rb inst_inc_second.rb misc.rb lib installation cio_ignore.rb clients copy_files_finish.rb deploy_image_auto.rb deploying_proposal.rb desktop_finish.rb disintegrate_all_extensions.rb driver_update1_finish.rb driver_update2_finish.rb inst_addon_update_sources.rb inst_complex_welcome.rb inst_congratulate.rb inst_deploy_image.rb inst_disk_for_image.rb inst_disks_activate.rb inst_doit.rb inst_download_release_notes.rb inst_extrasources.rb inst_features.rb inst_finish.rb inst_initialization.rb inst_install_inf.rb inst_installation_options.rb inst_instsys_cleanup_client.rb inst_keyboard_root_password.rb inst_license.rb inst_modules_extensions.rb inst_network_check.rb inst_pre_install.rb inst_prepare_image.rb inst_prepareprogress.rb inst_release_notes.rb inst_restore_settings.rb inst_rpmcopy_secondstage.rb inst_save_hardware_status.rb inst_system_analysis.rb inst_update_installer.rb inst_upgrade_urls.rb inst_welcome.rb inst_worker_continue.rb inst_worker_initial.rb installation.rb installation_settings_finish.rb kernel_finish.rb ldconfig_finish.rb network_finish.rb pre_umount_finish.rb proxy_finish.rb roles_finish.rb save_config_finish.rb save_hw_status_finish.rb save_y2logs.rb security_finish.rb security_proposal.rb services_finish.rb ssh_import_auto.rb ssh_import_proposal.rb ssh_settings_finish.rb stroj-casu.rb switch_scr_finish.rb test_inst_client.rb test_proposal.rb umount_finish.rb x11_finish.rb yast_inf_finish.rb console console.rb commands.rb gui.rb menu.rb menu_plugin.rb plugins plugins.rb console_button.rb shell_command.rb tui.rb copy_logs_finish.rb custom_patterns.rb dialogs complex_welcome.rb desktop_roles.rb ntp_setup.rb product_selection.rb registration_url_dialog.rb security.rb ssh_import.rb url_dialog.rb driver_update.rb instsys_cleaner.rb instsys_packages.rb minimal_installation.rb proposal_errors.rb proposal_runner.rb proposal_store.rb remote_finish_client.rb security_settings.rb select_system_role.rb selfupdate_verifier.rb services.rb snapshots_finish.rb ssh_config.rb ssh_config_file.rb ssh_importer.rb ssh_importer_presenter.rb ssh_key.rb system_role.rb system_role_handlers_runner.rb system_role_reader.rb unmounter.rb update_repositories_finder.rb update_repository.rb updates_manager.rb upgrade_repo_manager.rb widgets console_button.rb hiding_place.rb lsm.rb ntp_server.rb online_repos.rb polkit_default_priv.rb product_selector.rb selinux_mode.rb system_role_reader.rb system_roles_radio_buttons.rb transfer file_from_url.rb modules ImageInstallation.rb InstData.rb InstFunctions.rb SystemFilesCopy.rb Vendor.rb schema autoyast rnc deploy_image.rnc ssh_import.rnc scrconf cfg_windowmanager.scr etc_install_inf.scr run_df.scr YaST2 org.opensuse.yast.Installation.desktop org.opensuse.yast.ReleaseNotes.desktop org.opensuse.yast.Upgrade.desktop autoinstall modules deploy_image.desktop ssh_import.desktop yast2-installation README.md sysconfig.security-checksig yast-image-deployment.svg yast-installation.svg yast-release-notes.svg yast-ssh-import.svg yast-upgrade.svg yast-installation-symbolic.svg yast-release-notes-symbolic.svg yast-upgrade-symbolic.svg yast2-installation COPYING org.opensuse.yast.Installation.metainfo.xml org.opensuse.yast.ReleaseNotes.metainfo.xml org.opensuse.yast.Upgrade.metainfo.xml YaST2 hooks installation /usr/bin/ /usr/lib/YaST2/ /usr/lib/YaST2/startup/ /usr/lib/YaST2/startup/First-Stage/ /usr/lib/YaST2/startup/Second-Stage/ /usr/lib/YaST2/startup/common/ /usr/lib/YaST2/startup/hooks/ /usr/lib/systemd/system/ /usr/share/YaST2/ /usr/share/YaST2/clients/ /usr/share/YaST2/include/ /usr/share/YaST2/include/installation/ /usr/share/YaST2/lib/ /usr/share/YaST2/lib/installation/ /usr/share/YaST2/lib/installation/clients/ /usr/share/YaST2/lib/installation/console/ /usr/share/YaST2/lib/installation/console/plugins/ /usr/share/YaST2/lib/installation/dialogs/ /usr/share/YaST2/lib/installation/widgets/ /usr/share/YaST2/lib/transfer/ /usr/share/YaST2/modules/ /usr/share/YaST2/schema/ /usr/share/YaST2/schema/autoyast/ /usr/share/YaST2/schema/autoyast/rnc/ /usr/share/YaST2/scrconf/ /usr/share/applications/ /usr/share/applications/YaST2/ /usr/share/ /usr/share/autoinstall/ /usr/share/autoinstall/modules/ /usr/share/doc/packages/ /usr/share/doc/packages/yast2-installation/ /usr/share/fillup-templates/ /usr/share/icons/hicolor/scalable/apps/ /usr/share/icons/hicolor/symbolic/apps/ /usr/share/licenses/ /usr/share/licenses/yast2-installation/ /usr/share/metainfo/ /var/lib/ /var/lib/YaST2/ /var/lib/YaST2/hooks/ -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g obs://build.suse.de/SUSE:Maintenance:29504/SUSE_SLE-15-SP4_Update/ac422e52f55f393b0442e754191a48db-yast2-installation.SUSE_SLE-15-SP4_Update drpm xz 5 noarch-suse-linux POSIX shell script, ASCII text executable Ruby script, ASCII text directory UTF-8 Unicode text Bourne-Again shell script, ASCII text executable ASCII text Ruby script, UTF-8 Unicode text SVG Scalable Vector Graphics image XML 1.0 document text
" $ R R R R R R R R R R R R R R R R R R R R R R R R R R P P P P P P P P P P P P "mΊ)P yast2-add-on yast2-firewall yast2-online-update autoyast(deploy_image:ssh_import) utf-8 73a21b58818a442a4d905fef7a4c21591ada3a24c5603242a9314a3ad8c885df ? 7zXZ
! t/Z] "k%uX %AtY>4\ e&Rڮk0 ih=*O t5 { TVZ>)u眱 ࿗^_ 24 \i4\mz"\e27V*5;<#GG~~C"Oeh+>2:9n Bnc@֒W);;''ɒ }
.zFR\g1ZG>_^ P p7|.3X0 r˲Sg
H!aWoCs
? IuנlrT%eۙ -M!&_I*I.Rq| UxVgUY++΅}^A =E
;wKAK^6YLW7+ Zx'"1 װҊ._)|cBF=;bLӐipઌ:W;ry }cyhywi
b6䤎daq]瀜xa;ų*z aٵҊP%~e0P&+^yX TwPVu?e[z> 0fC|~B-S 6OK4}fXFܘw)Kӟq S-A@<{S{{hNߊNJu @^ yb ^.Za0ѡOOwelhs |
V'Z6P*˽H&Kv|7,B.9-k]{M=RΚ\#J^ Qw ܨl桾|b S~ !FÖ5>se-6wOu?}̊,2bweT/ ~OsM3$6?G.OWVx|TFJ]& Qj8 Yu'͑s?U{# y$ h#4A웯ϳ!XtxkGtBEE+",Dxo|`ޜRyc[ CbvL=i=K](1{O0.Dk8k-m tU|KNh^Lm
vP&@F"\(> Ո%O8JΕJa8RJu |Ts2ac(~p)__Hi1 Mn;-1Z*lį`o5k>L)$AjP窸%ךP⌚.S83 /KOޛz v^|B#nhʨx&h
r)dL$ ]Ox1&Eu5աI|ݧ4Eq>UӻqJ~Ѥk[+yWF,eMKWiQKU>m&!E+*:1 ~P=siٍԓ*=:pNsaưIef2]Mn:.I8//jg1ݎ5
ή^: Fˍ!!/W=P\csɸsܜϭQ(;;kUX+gbZ6=^x< >]/@POa < ^#/[͛kUzǝ z{,9 >d;VVE=LbyӥY3@؝O^GnԣLR~ϕz
̅xOB:z s]\ Bt 4G?a42ު_s2>8*W#i=LVw4k?gs2Y7S xp0%& `D;:)|bRbyHyY9w՛f&Y9uVkrVUuP踍xE/lNI ^p_C0Q[ 1
- ߦՈsT0V*_|c fUNZZ[3 SSD%E4oPdK ]zQUkoDݽ.*^[׳4
6lU^s3xrpoP;wG% &]vWWzƼw|}Os fS9 ?5:5y˪QDo`2tau#ːme_mģ.gRB.[>]PW#,r6Kޟ:zԝ8ƠB jFGEyw+ Ћ4F:>-NWG˫{?( A a$+7d <R8)l B$#%Tp!LIUC{iL@ێe\Nxj5ueJS_Pڈ3PR23T(' [k(]B *01$h,?hD]\ ]R`DeԖM5`6ܶ)Ig?f.oJ wj%*G;͏Ԅ=W\W?DE?M՛1'-ZԆ?-G\6&cȡł~
X2Յ;,mβ3Y|ɯ2S*f-XOX>u)C }9վ-q>)#K~*p64YI PˑQm&{bŧ`'ֵfĹ6}!rqum6!WIT}ǭjݛN{Gck.fDk4!RED r`/>}w\ і?*+U;àҭǰ%tY8~wX aײ2`_#' !M5SUq6 ;c Cc!91L4|8I6L#2VlM h4X~$oFX~|B}T(:lVĺ!D̅G[cvNfAY04C3
Èn bh%a %PpH{Gl sr{س2)#4H- H"wh 9x@ ϟx=J 6F>Yqdjl|nkM
B]۩Y@dM
Oۉ467Oڐ 2>h"|s>^<]6bJ⠖;
<H]Y\~{\subNbݖwxwencQ.{n #W
/ʮ묩0S>GF
oW ZDt,VRXHa
;<2 G^=#":w| oH9;1۰OגW%1 ҈O_J VAֲίƛ:N)>!deohVtHZ+67FH}^7kk %H wq0 ;chI6w4 &^s b><?jE HerVtۄڋ25SLkuk nIy*jćk iD=hC]ZjHޡ$E i"0]#bQ4Nԏmds4U 8(sa.cō]Dg٫Jpv$IDH03ے4#f`SKB/ԭ5BG՛Y s:NN98@ɄS&
Hbmdžح o[%WQիv4g o$6x4 gކ|MSp45B+:f4CdR+EOq'ϙLSse
% 2#l: V3Y*v4L5VCC\9 p|5'mhS\܆%f,5N>1Ipڴ݀V ~2D۸1{.dL YE%p}r{C[?09ڷD'.NdѮ{%V1FLyI@}\F 5%+TSlМ-E7d?0}p UD-gY2,u@\ӟ qk4{WQ(0DG ,NWDO@⸠s/sAmA&@\r{_<ILaX{nBSϾ[2 '|
/ے iض%͓7BS+$W+Q59|Ps+ -|waD9 mlqj[`x. {:BEw#r_}*jh+5s@eGU*:g-r=-맯װ&{ԨgW#Yϰ`mCMg:zT yi- E@
.:BQZT0
]Ŭ n4ϕLtŵl ʷ.`VE B
{xsc9ihQ`nuH״[P`nz@)r{`SzsV#Lt4EQN.
ïFK6
- ;
LU#skV= dѤb K=&,39,CiB//;"!-L[e j7M Q)'EPiѐ~11Cppw{ځ*{fi`rsѫ~ z- >. ~;}[ KRXJ2Ou݇CmT>8)a/^"uՙfYVZl̝_U,_* -/+8UqBhe rGL_ot%g`* =Epߓ6h>W켎 tdP9Kp1UOpJhFk[h,n[n HXqH4g̐,5V>66@NfYƩN}~hn0`;sNtĢf52z`V>u4;>c RvFi#$9
V:{Džޕoq[Bkm HZ~
yH9 tA\ - g ܰ J<2;22ǹxH,[#CiZ2Oh7sZU 2Wb-` 8&66N T9$pGOrZ Ź.~̓:+$IG5ׇ ?MS?XwEdUq0AC8ac_3^=x#twgB^g[`
|A3sȁURiX;8u2r G\)
R֢.!L eΦ 9~b6}UE8`$
{Ða8-ǚj>37+fwɧQTWI3p4HvEsWGL&QJyEW1 I0Ff䮆 (nRTEȗcbpl̦McLb kSS y5D?>8. }IƬ`ԶViCX%QZoFaUM"x+ѳ BeЩ߰cGv\#-;ݚTx6$x|
"k)۩1 u0 ytk TyEv4R>\N3Y|aar/{qiFH\9eE<2āXYi '=kh|6 548OLj$Lی8KlN.7ٕaO!N[Ĵ` 8[ݷ>s7= < z)ܕ5Qb'cWkUDs5&L!h0Zv5i1-M19 ?͙RV3wg?9x""P9}@Ǟۚjew;&M,Ty~#@{&0 3-ĸ_Wi@pP2d
T/ahuc#<|$BO:os%p A
tɯ_1dUݔы2ꮊƥFq\RЙS-661sƤ mo@C42?&EN.) ONՔD+gO@vz[f>Y 17V`\>$A"6[_/JTGnUC1$:g=Cj=#/_rϟzgEX94?H7.7w~gvy!^,鶣SqrϭwhA`WBʗJ^NǭU}_ Qag mQjLa CA,
~#e>WL@]D? G1>bF`4eRF?,L
1 "t$ GANEcaiŃ} Coc%◺qc(~Qh6Ӿ4@e*]g['9FI( 橻ܼ[~]81*'hۘ] 3~wˬ} ^ Y @ RȪh
(@9'LW{a:meq " 33tN`S;S {
4z4"PA\ Pp]|x ff$ZZX .w+X W UtL|R\:[`=]Vm,;m42K O)W:S١Gu}En
e
[MgX!6"t\dqA}9mfDL̡^=M a"Y*}yugOLuBSM ҁQShYK] uy z-UYQ=[-Ähh'X
LmPs ^ rC0x/ 4S:_V waBӈD
TBʎqJZ]3R
͵BC ^ejJm9iV.vp5fU-~s
x+yu.+8V -C#0 \Q)uk`TP!\ees`oX8oX1FpOFhhcӆvʍ o7D;7Ɂ|{r;@JGIwHG/n ze]%/tٛdhጡ̒_kޝ2|V%0*WTW;مt zVb_Uo1Gb 5|'$4"@ "ՓpB4bCub6Lg|mqaυ}msf.BY̧>Lgl'GƜ+9XcЫ2v=4C} igϱ'rSu86'lo0hꋂp<%ڕQ 'U b$'Iu+Q jЅKO7DXPL1e FR~ڠ
k_OR\-5{
ͺƐnWhY~8{*UOyZifEBxh]Lq`c HlVW%Y8N,DrP#b{m*t\ 9)Me葞^FQ_1,{lk꒷7* {A> Gp ZJ g#_rNsuѳRMVT 7FJt_\B,SGyJ\^p6=EڨQ~mcD RU`XƊV7K*Ęڬ3.njirE
3۟ QA^{BJ:fM3w [UVΖ6ygv' 9-&ˎj9 "mᾇSWߐ=b\ GٌTanuĞJĶ4v"SHES'F@K=)2gf~P_Ѭ?T-ThXR6r.}}We%pdIr9P/-ks]r =;z]Zٛ 4gt_Vyya0SO>> j`&39ӻs _>OT>یg#!fr .xOZTtC*6M5 gE=7
T$2 ʂw OŢ+ 1V08q1Tcp]LMl҈!!úb u* g]M;յBS t6 g=^Kẚ-cW`G(|_YMT~1;_wV!k&%V4`bQSAI'd= +=ph幕D z2 Xq85G U C>b<
b'"MBr.r$d@oS*YJ{fB;
! 9 xEA :4
ƶ?awk>f Ho 2,&?Y͜Z: |B1)/ eF
G2 Am{Q5ior.E`|
W$Yt?=Z8I M+a96tY`$w #(>FE:<.O{2rMF?*7ÚF
!KgKM` wGZ VQ`f
[~r{nɽ3Z?=|G}&<ڍQ́H7!l {c"ܾzM3l㼕a{F+$YV 5
Dpg"U993Bk\}sw,ph5 e[~Cw7aڐz2ju$(_CѬR+cY?qC*ల/LBw~NydeJk5kX)"9zyDOCϔS<4-GͶ(#)ZHPV8*:& aq熅ءO=-B;ʁGۘD#H
Éޑy?pJ v[
;.q#LRvNΰAvyC;.F7r۹
̓/bV@/W\&* `r;'leEӣX]PC|WwpH C{mB,#bn!pY?aR{nvbbQ ?bQv Zp\`m`
62X&7^;/.TyE
tNJp$+䰥~Y}0n A\^P&m8:qK%T۸Id)yy7`q> s`+([Iq@(a; Q 34% |ݝL1 # +}h$! IU=C DMj|b 8\ϭv~?0l EW
D2Un/e8 $h҄$j]-X#l]XHo keSEc Cp;jbj}% z' _+Pc[e`hA{REz?-N>(EعGuMc^Dk HVaKs_^{5/{Q\ږ!ْ!0$ ~`nO/he cxX(}?XEPwojw ^46CoPSdէ[@Üln+wl74jVtqtS36n -j`egM c16o {[[};=vk/OeSE)J9ݡ:I}zC-> .)f92 iU{xm̢l$pr TO@ qYG֝5\5 'Y!ƃTD`Dʠd?-ْi; }gSԚ^s cR;#V; | |:?7>nyÛe_,z`ίF$!;ȇ/_=(%e
x Otw8,UIW+7px7@*p-KK6B|5mYOE.IQ~9R?6n0z ^zեaG9Xw"p
m H6 eꠜ#VbsrL9f?T#o0BV
C9gQ`ڻt
jGb0NȌ+4߁ Y|5(\>
h6Fc sHs< ^B! cwN-tUݧ9}-8"FO>op~rb_ahѦ|nzFV ^^%Mb[N@"@a:/.H#]H$xn7VW= O/ظT>6zNGT/E`ZgScS.Զv +*F5$͙7z 6 ER7SBߜ D034B<Hy7BZ!̽J|aB[ iĉF!2 y ٶ?=u#AD 0Q!Q
ӡcs xEm<*J}& Dv-WMW* _J ~
McI_ Wq]0,
ZzW8cu8S;eǸ,}6$)p] [_H:L
revlEHT/&3,dۣ杉K:#U[ ]i|n$^
uWNHZ\j|LܦU oxFg#=CQi N_! ~J;S)8zS(Jdl54^ $ {3߾WM|Yhm-iF3z]0o2+OrLBxQL ؠ|.IЦ'KZitq . DOGi]c"bt\i&iV5͏6o@{ T
.@,}' 鋻uUK ]{ $N$M9x7/|
{L|yG[xN|o,),P{2 [qJPe(/e%= .]!XJyDG7
wWLX 'w^)wa'ם;OdHfL"!A[koYؖ^5PKXEЏ
{P# 'bD9۠aC\7[:
s(ӛƝx ϴ BKt
1\4R I .Qfs$/糨 Gc
y["JrG5&s?q~!@ ͐_wR>`)z^BԵS` s˽Ռ6FmW T6tn@ as E[Tgn >a6~Q=bnGh*ɊDL7=5:;9Zi榞U$`?-а| k8b7ڡ
>l{(t+3t3 nOVS!\+ w<(rw;b_ۅQʺaN
tg ujW"deɧ.=t4((j8 cqjQ ɽ
US_ 0 0Hu?oL;GԵȐXJ):!scpιL3M S/roY
ӢJ}PtF FD_YAJ>&D?P&.umUl8^LwhK+PM;Dwi2=թmw&;p{1e6։jy%7/ez9Ҭy(nZ ,4t\'=v ~C} 2GmHG3" q t# KN[rwfTD^ Eln\1c9yݔ$"A(>lY
SVJisd+5'{bQ,:l[.-v d> VUn`˛@'O%ǣ?
iޤT-#9xux>XjnoCi,fc\x5.^,lI'([`EܹM߫4ԼvkPnPS"%:)iac Y
2Y%⦂(/#7dܐA3xoKItpA":b^8/&5v}ZT\Et[*oCeݱQCq|ZA- ̠r;^r̀< SRli8|NN?>'$ytT8'W`=*5۵\`TZv71-9-"f&P<0> Z38T84> `KyҘ I}%}X~q&'`8ic/ݣve\%Rv> 70sf8y^s[v N
v?| c |Fɐ K5aϛ[IqKg:a@4Ԥ ݪ!& cQ
w2!tY''1D"Bu̹
70wG;zBՍ#YL+Ӭä%6t %\x<<:7Zeh=}H"@ ]_#lw4ow{tEx*W}17s3fywu9~2iq);kpp1L~VW/4N12wwj~e-ғg[])&DDSnep'0Vdq
[%i,-MܑIfσx/ ֲLxכT-Rm_-)ry/m=g\Vg0ؙ0? 1Y¥/C0ݽ8iDZ+L%?|/R Z
k4&Y: L4Y=B{C+T-;d cX2
K-py >jyå{YVq1[v=w{"+L<xFANp x}aeI#Mz۰J,}J2 iFRQ~}{AZK0ET("Uk }::BK2)l%vF B6m^1$: # D)7^>@rݷ ʑ.Qx'_ȉw &,yTH{227;_&"ÆJ"gzS}K?Ƅ#
FRt2θ9رf!llcx_ feHzlh>,,
/m$ CV] 4T8\7i#
bR=87vr^6
Tۂ r ꩡ{l6Lu跏? xjz
ꄪq[͞# ,-MRUR^%ډ7>8ڲK >n-/q"#YK o $qs& bP$<)Wp` L=W V.{!I2X K82t= RtgǸvuRkHT##(fF>.gD#T
O
Cc@Y yavGCGxI l& Rf)#E'q5lzKqOt\8]o4=Dxn\mjCM`@_F:wPZ.6mރ ϐ\ tR ۽:e 'FE?S!M2 !4腥xk 07]e%W;
3Ɯ߇Ɖn|j}T`}h9Ƥ{lby6Q% UF & WS%N]753 7!\u(:k 53-~"I֣xuÇ5ӥ3JㅄϙcL0_]Aǒ xsgl.А> >D?Qp}ʑR4/t/:̡Y"Gݧ)\_U3:Tڟ$> (B:pzsIl &i24C a5dm/c(?Q'.Ap _`QIŲ1ƒWk-W
in0H0ٜ3Y7]|Uud"< "qj$t ņs(
DB9MkeQ쒠& eĔXqwYqt;
3Wf0BT݆>#Jz_g(2϶;V U5Ex"}5Ln}i [7ErahT)D1P"7Xb9nc(4s>Knn۾Ҍ :'L.
KWo> i룫:~;4D(7CvcC-.TeŔ\ܷpT M|_nAP)T`fyߏk>> AW;8Qؔh"}p;cCx7ҡiU
JU\+Rs汵#
>Lqź*|3Olr=KJ>44#+s+sfꕑ@I7aa܁@ذ&zY_9*[$I1 ؼZ[u$ ʓOEMEhcr\l5'*<1ke(EŻ@R>d 8f8;cċΆl`}bB !$2=z9 M9:@MhX x1TGP 3 'C_XMmxeh }w2n?OhZf0LitLc
fxhhD2y p_~jByv
6ӱ;88#y^z%H3|V"̥
IJ b]
RWL2) $^1@i.e\KNN߲b,e0ϖ:>spo sK_#~hO=Ϭ]1j
Mp9z8ga Z"e9DXGKԦ6_.U-ʂo=\ YH_IpVێ?9ͲlU?q qDgr{X
cHY N L Baeٍ4zFJ kWŹ e]ĈU7@ -1"R? ͋]
YZ