NAME
    Test::Signature - Automated SIGNATURE testing

SYNOPSIS
        # This is actually the t/0-signature.t file from this distribution.
        use Test::More tests => 1;
        use Test::Signature;

        signature_ok();

ABSTRACT
    "Test::Signature" verifies that the "Module::Signature" generated
    signature of a module is correct.

DESCRIPTION
    "Module::Signature" allows you to verify that a distribution has not
    been tampered with. "Test::Signature" lets that be tested as part of the
    distribution's test suite.

    By default, if "Module::Signature" is not installed then it will just
    say so and not fail the test. That can be overridden though.

    IMPORTANT: This is not a substitute for the users verifying the
    distribution themselves. By the time this module is run, the users will
    have already run your Makefile.PL or Build.PL scripts which could have
    been compromised.

    This module is more for ensuring you've updated your signature
    appropriately before distributing, and for preventing accidental errors
    during transmission or packaging.

FUNCTIONS
    "signature_ok" is exported by default. "signature_force_ok" must be
    explicitly exported.

  signature_ok()
    This will test that the "Module::Signature" generated signature is valid
    for the distribution. It can be given two optional parameters. The first
    is a name for the test. The default is "Valid signature". The second is
    whether a lack of "Module::Signature" should be regarded as a failure.
    The default is 0 meaning 'no'.

        # Test with defaults
        signature_ok()
        # Test with custom name
        signature_ok( "Is the signature valid?" );
        # Test with custom name and force C<Module::Signature> to exist
        signature_ok( "Is the signature valid?", 1 );
        # Test without custom name, but forcing
        signature_ok( undef, 1 );

  signature_force_ok()
    This is equivalent to calling "signature_ok( $name, 1 )" but is more
    readable.

        # These are equivalent:
        signature_force_ok( "Is our signature valid?" );
        signature_ok( "Is our signature valid?", 1);

        # These are equivalent:
        signature_force_ok();
        signature_ok( undef, 1 );

NOTES ON USE
  MANIFEST and MANIFEST.SKIP
    It is imperative that your MANIFEST and MANIFEST.SKIP files be accurate
    and complete. If you are using "ExtUtils::MakeMaker" and you do not have
    a MANIFEST.SKIP file, then don't worry about the rest of this. If you do
    have a MANIFEST.SKIP file, or you use "Module::Build", you must read
    this.

    Since the test is run at "make test" time, the distribution has been
    made. Thus your MANIFEST.SKIP file should have the entries listed below.

    If you're using "ExtUtils::MakeMaker", you should have, at least:

        #defaults
        ^Makefile$
        ^blib/
        ^blibdirs$
        ^pm_to_blib$

    These entries are part of the default set provided by
    "ExtUtils::Manifest", which is ignored if you provide your own
    MANIFEST.SKIP file.

    If you are using "Module::Build", there is no default MANIFEST.SKIP so
    you must provide your own. It must, minimally, contain:

        ^Build$
        ^Makefile$
        ^_build/
        ^blib/

    If you don't have the correct entries, "Module::Signature" will complain
    that you have:

        ==> MISMATCHED content between MANIFEST and distribution files! <==

    You should note this during normal development testing anyway.

  Use with Test::Prereq
    "Test::Prereq" tends to get a bit particular about modules. If you're
    using the *force* option with "Test::Signature" then you will have to
    specify that you expect "Module::Signature" as a prerequisite.
    "Test::Signature" will not have it as a prerequisite since that would
    defeat the point of having the *force* variant.

    If you are using "ExtUtils::MakeMaker" you should have a line like the
    following in your Makefile.PL:

        'PREREQ_PM' => {
            'Test::Signature'   => '1.04',
            'Module::Signature' => '0.22',
            'Test::More'        => '0.47',
        },

    If using "Module::Build", your Build.PL should have:

        build_requires => {
            'Test::Signature'   => '1.04',
            'Module::Signature' => '0.22',
            'Test::More'        => '0.47',
        },

    If you just want the default behaviour of testing the signature if and
    only if the user already has "Module::Signature" installed, then you
    will need something like the following code. The example uses
    "Module::Build" format but it should be trivial for you to translate to
    "ExtUtils::MakeMaker".

        #!/usr/bin/perl -w
        use strict;
        use Module::Build 0.18;

        my @extra_build;

        eval { require Module::Signature };
        if (!$@ or $Test::Prereq::VERSION)
        {
            push @extra_build, "Module::Signature" => '0.22'
        }

        my $m = Module::Build->new(
            dist_name => 'WWW-Yahoo-Groups',
            dist_version => '1.7.7',
            license => 'perl',

            requires => {
                # various modules
                'perl'             => '5.6.0',
            },
            build_requires => {
                'Test::More'          => 0.47,
                'Test::Prereq'        => 0.19,
                'Test::Prereq::Build' => 0.04,
                'Test::Signature'     => 1.04,
                @extra_build,
            },
        );

        $m->create_build_script;

    If you have any questions on using this module with "Test::Prereq", just
    email me (address below).

  Use with Module::Install
    "Module::Install" is a module to assist in the bundling of build
    prerequisite modules in packages. Well, among other things.

    "Test::Signature" is a perfect candidate for such a module. As it's a
    module aimed purely at those writing modules rather than those using
    them.

    Here's a good way to use it:

    Make a test file (say, t/00sig.t) that contains the following:

        use lib 'inc';
        use Test::More tests => 1;
        use Test::Signature;
        signature_ok();

    In your Makefile.PL (or Build.PL if appropriate) add:

        include 'Test::Signature';

    And that's it! You don't have to specify it as a prerequisite or
    anything like that because "Module::Install" will include it in your
    distribution. And you don't have to worry about size because
    "Module::Install" strips out all this waffling POD.

THANKS
    Arthur Bergman for suggesting the module.

    Audrey Tang for writing Module::Signature, and making some suggestions.

    Tels suggested testing network connectivity to Audrey; Audrey added that
    to "Module::Signature" 0.16 and I (Iain Truskett) added it to this
    module (as of 1.03).

BUGS
    Please report bugs at <bug-test-signature@rt.cpan.org> or via the web
    interface at <http://rt.cpan.org>

AUTHORS
    Iain Truskett <spoon@cpan.org>, now passed away.

    Currently maintained by Audrey Tang <cpan@audreyt.org>

LICENSE AND COPYRIGHT
    Copyright 2002, 2003 by Iain Truskett. All rights reserved. Copyright
    2003, 2007 by Audrey Tang <cpan@audreyt.org>.

    This library is free software; you can redistribute it and/or modify it
    under the same terms as Perl itself.

SEE ALSO
    perl, Module::Signature, Test::More.

    Module::Build, ExtUtils::Manifest, ExtUtils::MakeMaker.

    Test::Prereq, Module::Install.